User`s manual

4. Installation Guide
User's ManualUser's Manual
8 9
First time installed, the Installation Guide menu is preset for English
language and Australia. Press OK to search. After Auto Search you can
skip directly to using your receiver.
! Press Up▲ or Down▼ key to select OSD Language or Country;
! Press Left◄ or Right► keys to select options;
! Press OK to Auto search channels or Press Menu key to enter Main
Menu.
6. Channel Manager
! From Main Menu press Left◄ or Right► key until Channel Search is
highlighted, and press the OK key.
! This menu provides Auto Search to scan the whole TV band or
Manual Search to scan one channel.
5.1 Country
! Press Up▲ or Down▼ key to chose Country, then Left◄ or Right►
to change country option.
5.2 Antenna Power
Use Antenna Power ONLY when a 5V amplifier is connected!
Press Up▲ or Down▼ key to highlight Antenna Power.
Press Left◄ or Right► to turn On or Off. Default is Off!
.
5.3 Auto Search
! Press Up▲ or Down▼ key to chose Auto Search, then press the OK
key to begin Auto search of all TV channels.
5.4 Manual Search
! Press Up▲ or Down▼ key to chose Manual Search, then press OK
to scan a 1 single TV channel.
a) by Channel No., press Left◄ or Right► to chose, or
b) by Frequency, directly enter centre Frequency number and
Bandwidth with Left◄ or Right► keys.
! When a channel is selected, signal Strength and Quality bars indicate
the presence of signal. Press OK to begin.
5. Channel Search
This menu allows you Delete, Lock, Move, Rename Skip or Sort
programs and select Favorite programs, etc.
6.1 Program Edit
In this menu, programs can be edited as follows:
! Move(Red key): change programs' position;
! Skip(Green key): skip one or more programs;
! Lock(Yellow key): lock one or more programs to block;
! Delete(Blue key): Delete one or more programs;
! Fav(Fav key): classify one or more programs to related class;
! Rename(Recall key): rename a programs name;
6.2 Sort
This item can set up the index of sorting channels.
! Press Left◄ or Right► key to choose indexing order between
Service ID, Service Name, ONID, LCN;
6.3 LCN (Logical Channel Number)
To sort channels by their LCN Press the Left◄ or Right► key to switch On or Off. When LCN is on,
programs will list according to their LCN when scanned.
7. System
! System settings menu provides the following sub-menus:
Parental Guidance
Set Password
Restore Factory Default
Information
AV Setting
System Option
Time Setting
7.1 Parental Guidance
Block Program limits program access the by the program rating
classification. System password must be correctly entered first. Default
password is 000000.
Press Left◄ or Right► key to chose and OK to confirm Program
parental control level.