User`s manual

User's ManualUser's Manual
10 11
7.2 Set Password
Your receiver provides an active system lock which allows you to limit
menu and settings access by means of a six-digit security code. Default
password is “000000”. To change:
Enter Old Password
Enter New Password
Confirm New Password
Note: record a new password so you won't loose it!
7.3 Restore Factory Default
! Allows user to restore the factory default values.
! When you press the OK key, the Password box appears. Enter the
password. The Warning window will appear. If you select Yes, the
system will be reset to factory default values, and channels found will
be lost.
Warning: Factory defaults looses all set up data and information. USB
program recordings are not effected.
7.4 Information
! Displays model name, Software and Hardware Versions.
7.5 AV Setting
Alters parameters of Video and Audio output as required.
! Aspect Ratio: Select the TV Screen format from: 4:3 or 16:9 and
letter box or panscan.
! Resolution: Select the HD picture resolution from: 1080i, 720p, 576p
or 576i.
! TV Format: Select the TV output format from AUTO, PAL and NTSC.
! Video Output: Select the Analog video output format: RGB
component, CVBS composite etc.
! Brightness: adjust from default settings to taste.
! Saturation: adjust from default settings to taste.
! Contrast: adjust from default settings to taste.
7.6 System Option
Here you can select On Screen Display (OSD) Language, Subtitle
Language, Audio Language, Digital Audio and Audio Description modes,
where broadcast.
! OSD Language: Press Left◄ or Right► keys to select your desired language.
! Subtitle Language: Select the first language to play if this language is supported by current subtitle
data. This depends on the TV broadcaster providing this option.
! Audio Language: Select the first language to play if this language is supported by current subtitle
data. This depends on the TV broadcaster providing this option.
! Digital Audio: Press Left◄ or Right► keys to select digital audio output mode from PCM, RAW or
Off.
! Audio Description: Press Left◄ or Right► keys to adjust the level.
Note: Audio Description refers to an additional narration track for the visually impaired. It consists of
a narrator describing what is happening on screen during the natural pauses in the audio. This
function can be actived when a programme containing an additional AD narration track is broadcast.
7.7 Time Setting
Set local time according your location and sleep timer.
! Time Offset: your receiver sees GMT or UT time information
automatically in each broadcast. An offset of 10 hours for Eastern
Australia is set Automatically but can be set manually if necessary.
! Country Region: Select a reference region or country
! Time Zone: Select GMT offset for your region, with current date and
time.
! Sleep: Select put your receiver to sleep at a specific time.
8. Game
Six games are included in your receiver: Tetris, BoxMan, Snakes, Gobang, Jigsaw and Reversi.
! Press the OK key to enter Game list menu.
! Press Up▲ or Down▼ key to choose a Game, and press the OK key to begin.
9. General Viewing Function
The following describes the basic function of your STB while watching TV or listening to Radio.
9.1 Program Information
This section explains the general program Information sent by the
broadcaster.
! First press of the Info key reveals a basic Informaton banner at the
bottom of the screen.
! Second press of the Info key shows a more detailed description of
the current program.
! When the information banner is being displayed, pressing Left◄ or
Right► keys shows Current and Next Programme Information.
Press Up▲ or Down▼ keys to view to previous or next Programme Information.
! Press Info key again to remove the Information banner.
Note: Sending Progam Information is a Broadcaster option.
9.2 Channel List
! In full screen play mode, press the OK key to display the Channel
List.
! Press Up▲ or Down▼ and OK keys to select another channel.
! Press the Exit key to quit.