User's Manual

User’s Manual / 사용자 매뉴얼 /
產品手冊 / 產品手冊
Introduction:
Thank you for choosing this Verbatim product. Please read this manual carefully
prior to use so as to fully understand the product and its correct usage.
Caution:
- DO NOT alter, modify or disassemble the device. There are no
user-serviceable parts inside, and incorrect reassembly may result in shock
or fire hazard.
- DO NOT drop or subject the device to strong mechanical shock. DO NOT
expose to moisture, water, rain, snow, spray, heat or sources of ignition.
- Use a damp soft cloth to clean the surface of the device. DO NOT use chemical
solvents.
- Contact our customer support team if you have troubleshooting issues with
this product.
- DO NOT operate the device if it has been dropped or otherwise damaged in
any way.
Package Contents:
• 1 x Wireless optical mouse
• 1 x Nano receiver
• 1 x Type C cable
• 1 x User manual
First Time Using:
1, Turn on the mouse. The "Wireless Indicator" blink in green once.
2, The "Wireless Indicator" turned to blue and blink slowly. The mouse is in
Bluetooth mode.
3, Switching between Bluetooth and 2.4GHz mode, press the "Setup Button"
once.
Remarks:
1, The mouse will memorize the mode it was the last time it turned off. It will
automatically turned on to the same mode as last time used.
2, User can simply switch between the two mode by pressing the "Setup
Button" once.
3, Switching from 2.4GHz to Bluetooth, the "Wireless Indicator" will blink in
blue color twice and connect to the previous connected device immediately.
4, Switching from Bluetooth to 2.4GHz, the "Wireless Indicator" will blink in
green once and connect to the receiver immediately.
Connecting with Bluetooth:
1, While the "Wireless Indicator" is blinking slowly, the mouse is broadcasting
the Bluetooth pairing ID.
2, Look for the pairing ID "VBMouse055" from the Bluetooth setup of your
device and choose it to connect to the mouse.
3, The "Wireless Indicator" will shine in blue color for 3 seconds and off which
means it connected successfully. The mouse can be used after connected
sucessfully.
Connecting with 2.4GHz:
1, While the "Wireless Indicator" is blinking in green color slowly, the mouse is
under 2.4GHz mode and searching for the receiver.
2, Take out the receiver from the mouse and plug to the USB port of the
device. The "Wireless Indicator" shine in green for three seconds and off.
3, The device will setup the mouse automatically. The mouse can be used
after the setup completed.
Product Features:
• Resolution: 1200, 1600, 2400 dpi
• Battery capacity: Li-polymer 300 mAh
• RF 2.4 GHz / Bluetooth 5.0
• Easy installation and setup
• Turn in sleep mode after inactive for 56 seconds for power saving
• Operating systems: Windows XP, 7, 8, 10 and MAC OS
Others:
• Changing resolution - user can change the resolution by pressing the left and right
click button at the same time for 10 seconds. Please note there is no indication of
changing resolution.
• Reset the mouse - Press the "Setup Button" for 10 seconds (the mouse will be
reset from all previous Bluetooth connections).
Q&A:
Q: The mouse doesn't connect to my device with Bluetooth which had been
connected before.
A: Check the device's Bluetooth is on. If the mouse has been removed from the
device, press the "Setup Button" for 3 seconds, the "Wireless Indicator" will blink
quickly and broadcast the pairing ID. Connect the mouse again from the device.
Q: The mouse didn't charge when connected to the charger.
A: Please make sure the charger is on and does provide power output to charge the
mouse.
Q: The mouse doesn't move as smooth as it works before.
A: This may be an indication of the battery level is getting low. Recharge the mouse
and try again.
1 Year Limited Warranty – for further details visit www.verbatim.com/warranty
EN
EN EN EN
EN EN
EN
Verbatim Australia Pty Ltd (ABN 39 005 706 374)
• Warranty Statement
Our goods come with guarantees that cannot be exclude under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
Verbatim Australia Pty Ltd (ABN 39 005 706 374) (“Verbatim”) provides the
following warranty in relation to its goods (“Product”).
The benefits of this warranty are in addition to any rights and remedies imposed
by Australian State & Federal legislation that cannot be excluded. Nothing in
this warranty is to be interpreted as excluding, restricting or modifying any
State or Federal legislation applicable to the supply of goods and services
which cannot be excluded, restricted or modified.
Verbatim warrants that, subject to the exclusions and limitations below, the
Product will be free from defects in materials and workmanship for the period
specified on the product packaging and/or the website from date of purchase.
If a defect appears in the Product before the end of the warranty period and
Verbatim finds the Product to be defective in materials and workmanship,
Verbatim will at its own discretion repair or replace the Product free of charge.
If goods presented for repair are capable of retaining user-generated data,
repair of these goods may result in loss of the data.
• Proof of Purchase
Proof of purchase shall be required to be eligible for this warranty and to
establish the commencement date of this warranty. This warranty is valid for
the original purchase only and is not transferrable to a subsequent customer if
the Product is sold by the original customer during the warranty period.
The term of your warranty period shall commence from the purchase date
appearing on your purchase receipt from an authorised distributor, reseller or
retailer and extends only for the time set forth in the Product documentation. This
information can be obtained from the packaging and/or the Verbatim Australia
website.
• Returned Merchandise Authorisation
No product may be returned to Verbatim Australia without first contacting us for
a RMA (Returned Merchandise Authorisation) number. If it is determined that a
Product may be defective, you will be given an authorisation number and
instructions for Product return. An unauthorised return, i.e. one for which an
RMA number has not been issued, will be returned to you at your expense.
Authorised returns are to be shipped prepaid and insured to our Head Office in
qualified packaging.
• Notice to Customer Relating to Repair of Goods
Verbatim Australia will not accept goods for repair unless we have provided the
consumer with a Notice to Customer Relating to Repair of Goods that complies
with regulations. As the notice relates to the repair of Goods that store
user-generated data, the repairer’s Notice states that the repair of Goods may
result in loss of data. Since it is also our practice to supply refurbished Goods
as an alternative to repairing a consumer’s defective Goods, our notice
specifies that the Goods presented for repair may be replaced by refurbished
Goods of the same type rather than being repaired. The Repairer’s Notice will be
issued at the same time that we issue an RMA number. This statement is also
available on the Verbatim Australia website.
• Warranty Claims
1) If a fault covered by warranty occurs, the customer must first:
a) Contact Verbatim Australia Head Office using the contact
details provided below; or
b) Return the Product to the retailer from which the Product
was purchased.
2) Any warranty claim must be accompanied by:
a) Proof of purchase; and b)Full details of the alleged defect.
3) If Verbatim or the retailer from which the Product was purchased finds no
defect in the Product after inspection and testing, the customer must pay
Verbatim’s usual costs of service work and testing.
4) The customer must bear the cost of the transport to Verbatim or to and from
the retailer to make the warranty claim including all insurance of the Product.
Verbatim will bear the cost of the return transport to the customer once the
claim has been finalised.
• Exclusions
The warranty will not apply where:
1) The Product has been repaired, altered or modified by someone other than
Verbatim or an authorised repair agent;
2) The alleged defect in the Product is within acceptable industry variances;
3) Verbatim cannot establish any fault in the Product after testing and
inspection;
4) The Product has been used other than for the purpose for which it was
designed;
5) The defect in the Product has arisen due to the customer’s failure to properly
use and maintain the Product in accordance with Verbatim’s instructions,
recommendations and specifications (including applicable maintenance
schedules);
6) The Product has been subject to abnormal conditions or use, including
environment, temperature, water, fire, humidity, pressure, stress or similar;
7) The defect has arisen due to abuse, misuse, neglect or accident.
• The warranty does not extend to:
1) Damage or defects caused by normal wear and tear;
2) General, consequential, punitive, incidental or special damages. These
include loss of recorded data, interruption of use, the cost of recovery of lost
data, lost profits and the cost of the installation or removal of any Products,
the installation of replacement Products, and any inspection, testing or
redesign caused by any defect or by the repair or replacement of Products
arising from a defect in any Product.
3) Incompatibility or poor performance due to specific computer or hardware
used.
• Limitations
Verbatim makes no express warranties or representations other than set out in
this warranty.
The replacement of the Product or part of the Product is the absolute limit of
Verbatim’s liability under this express warranty.
• Contact Details
Verbatim Australia Pty Ltd
Unit 6, 450 Princes Highway, Noble Park, Victoria 3174, Australia
Tel: [phone] Fax:[phone]
Email: [e-mail]
Website: www.verbatim.com.au
Model: VAPMI055
(Korea only)
Specifications:
- Product name: 2.4GHz Bluetooth 5.0 Wireless Mouse
- Product model: VAPMI055
- Materials: ABS
- Color: Black / White
- Dimensions: 59.5 x 27 x 110.3(mm) (LxWxH)
- Weight: 78g
- Input: 5Vdc/150mA
- Operating Temperature: 0°c - 40°c
- Storage temperature: -15°c - 50°c
1
2
3
4
5
1. Receiver, Type Ccharging port
inside
2. Battery Indicator
3. On/Off Button
4. Wireless Indicator
5. Setup Button
Wireless 2.4G and Bluetooth Dual Mode Mouse
Model no.: VAPMI055
Verbatim#:66522
Rating: 3.7Vdc/10mA
Battery capacity: 300mAh
Input: 5Vdc/150mA
PO no:
MADE IN CHINA
Die-line K
66522
1C+1C
280L x 200H(mm)
80gsm Wood Free Paper
2020-05-27
Mouse Wireless 2.4G and Bluetooth Dual Mode Rechargeable Rodney
● Front Side
Product Description:
Part Number: Date: Finishing:
Color:
Folded Size:
Material:
Prepared By:
Remarks: