User's Manual

5
INSTALLATION:
For All Operating Systems
1. Make sure you have successfully installed the Batteries into your Mouse, refer to the
Installing Batteries section in this manual if necessary.
2. Draw out the Nano Receiver stowed in the bottom of your mouse.
3. Turn on you
r
computer, plug the enclosed Nano Receive
r
into an available USB port on you
r
computer. (TIP: If you are not able to find an available USB port on your computer, please
refer to the user’s manual of your computer for more help.)
4. Turn on the bottom switch and your wireless optical mouse is now ready to be used.