Product Specs

4.How to use
Power on and off
Pairing
（1）Before use it the first time, it’s needed to pair the headset and
mobile which support Bluetooth connection.
The headset is with built-in 1000mAh rechargeable battery. Do not use the headset while
charging. Insert DC charging and reset system Cut-off charging current: 10mA
To switch on the headset: in the power off mode, long press MFB 3 seconds. Blue light on
for 1 second and a prompt “Power On”.
To switch off the headset: while the headset is on, long press MFB 3 seconds. Red light on
for 1 second and there is a prompt “Power Off”.
Note:
1 . If the headset enters connection mode but cannot pair successfully in 5 minutes,
the headset will have a prompt “Power off” and turn off.
2 . Make sure the headset and mobile are within the distance of 10m and with no barrier so
that you can use the music player in your mobile phone to listen to the music and can use
your headset to make phone calls.
Better to keep the distance of headset and mobile phone in 1m.
Make sure the headset is in the power off mode.
Long press MFB for 3 seconds till red and blue lights flash alternatively.
Now it’s in pairing mode.
Open the Bluetooth function of mobile phone and it will search the headset automatically.
(Check the manual of mobile phone to know how to open Bluetooth function. )
（2）Connection：
The headset will automatically connect with the device which is previously connected with
the headset if the device is power on and within connecting range.
Once the mobile finds the name of headset “W1”, click it to connect the headset. There is
a prompt of “connection” from the headset to indicate pairing successfully. The headset
enters standby mode and LED light flash slowly.
（3）Disconnection：
Note, once the headset disconnects the mobile phone, it will turn off
automatically in 5 minutes. To play music in your mobile phone:
Make sure your headset connects the A2DP (Advanced Audio
Distribution Profile) mode of your mobile phone. Then your headset
can remotely control the music player of your mobile phone through
QVRCP (The Audio/Video Remote Control Profile) service
In standby mode and press “MFB” button, the headset will connect the device which
connected the headset the last time.
To operate the mobile to connect the headset, please find and click the ID number “W1”
(the model name of headset) to connect the headset.
Close the Bluetooth function of mobile；
To disconnect the headset, please do this：
Or turn off the headset.
（1）Answer phone calls while playing music：
If phone call comes while listening to music, the music player of mobile phone will pause
automatically and play the sound of ring tone. Please short press the “MFB” to answer
the phone call. The music player of mobile phone will continue to play music once the
phone call ends. You may need to press “MFB” or to operate the mobile phone to resume
playing music. (It depends on the features of the mobile phones.)
（2）Play and pause music.
While playing music, please short press “MFB” to pause the music and press “MFB”
again to resume playing music.
（3）Adjust volume.
While playing music, long press “V+” button to increase the volume. Please long press
“V-” button to decrease the volume.
（4） Switch songs
While playing music, please short press “V+” button to switch to next song or short press
“V-” button to switch to previous song.
The headset will indicate with prompt “Battery Low” when the voltage
is lower than 3.2V and will turn off when the voltage is lower than 3.0V.
Attention: please recharge the battery once hearing the “Battery Low” prompt so as not to
shorten the life of the battery.
Plug in DC5V±0.25 /1A charger. Red light on indicating charging statue.
Once fully charged, red light turn off and blue light on.
5.USB charging.
Low voltage detection.
Bluetooth technology conforms to the international standards
6.Bluetooth certification：
Plug in 3.5mm audio cable to use it as a wired headset. Once the 3.5mm audio cable is
plugged in, the Bluetooth will turn off automatically and prompt indicates “Power Off”.
7. AUX IN
Please double click “MFB” to get into low latency gaming mode. This mode opens
3D surround and simulate 7.1 channels effect. Low latency can be up to 53ms.
8.Low latency & simulate 7.1 channels
3D surround mode.
LED/3D
LED ON / OFFLED light switch Hold for 2 seconds
Switch music mode / low latency simulate 7.1
channel 3D sound mode.
3D sound switch Short press
Short press twice to switch MIC on or OFF.
(Open MIC or Mute)
MIC ON/OFF Short press twice
Power
PP/HSF
Volume+
Volume-
Press and hold for 3 seconds, power off.Power Off Long Press
Press and hold for 3 second, Power on
and enter searching/reconnection mode.
Power ON and Search Long Press
While listening to music, short press once
to pause. Short press again to play.
Play/pause Short press
While calling, short press once to end the callEnd a call Short press
Long press to reject the in-come call.Reject a call Long press
During searching, double press shortly to
switch prompt language.
Switch Double press
Double press shortly to redial last number. Redial last number Double press
Short press once to answer a phone call.Answer a call Short press
During music playing, short press to skip
to next song.
Next song Short Press
Long press to increase the volume. There is
a prompt when the volume reaches to the
Maximum.
Increase the volume Long press
During music playing, short press to skip
to previous song.
Previous song Short Press
Long press to decrease the volume.Decrease the volume Long press
2.Buttons functions
Button Function Operation Steps
2.After connecting the Bluetooth headset and mobile phone, disconnection or noise occurs?
A)Bluetooth power is low, you need to charge the Bluetooth headset as soon as possible;
B)There is obstruction between the phone and the Bluetooth or the distance exceeds the signal
reception distance,please do not put your hand on the Bluetooth. And in order to maintain the
continuous stability of the signal, please try to keep the Bluetooth and mobile phone in the same
direction.
3. Whether other Bluetooth phone users may hear my conversation?
When pairing the headset with a Bluetooth mobile phone, the dedicated linking route will be
created for these two Bluetooth devices only.According to the Bluetooth technology used for
headset, it is not easy for the third parties to monitor the conversations, and the RF power of
Bluetooth wireless signal is far less than that of normal mobile phone, so these signals are difficult
to be detected by third parties.
1.The mobile phone can't search the Bluetooth headset?
A) Confirm if Bluetooth headset is power on or off (if power on, blue and red indicator light flash
alternately)
B) lf it is power on and still can't search, please reboot Bluetooth and mobile phone.
9.Anomalies solutions
4.What happens when the distance between mobile phone and Bluetooth headset exceeds the
effective distance?
When the distance between mobile phone and Bluetooth headset exceeds the effective distance,
the connection between mobile phone and Bluetooth headset will be broken automatically. When it
comes back in the effective distance，mobile phone and Bluetooth headset will be connected
automatically without any setting.But some phones do not support this function, and the Bluetooth
device should be searched in the design list and then connect.
1.
In order to avoid damage to your hearing, please limit the time using the headset at high volume,
and set the volume at a safe level.The higher the volume is, the shorter of safe listening time;
2. lf you are in potentially hazardous sites, please stop using the headset to prevent damage or
malfunction;
3.Please do not expose the headset in high temperature places, such as in the vicinity of heating
facilities or in the car exposed in direct sunlight;
4.Please do not immerse the headset in water;
5.Please do not use any alcoholic ammonia for cleaning. If necessary, please use soft cloth to dean it;
6.Do not store the headset where the temperature is below-15 degrees or above 35 degrees.
The battery life may be shortened at low temperatures;
7.Please use the specified USB charging device.(Charging voltage DC5±0.25V)
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4) Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could
void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be used
in portable exposure condition without restriction.
10.Material particulars
Pairing Pairing
配对中
Red light and blue
light flash alternatively
Red light and blue
light flash alternatively
Red light on and then
turn off after 1 second
Red light and blue
light flash alternatively
Red light on during
charging. And turn off
once fully charged.
Red light and blue
light flash alternatively
Once per 5 seconds
Once per 5 seconds
Once per 5 seconds
Once per 5 seconds
Once per 200ms
seconds
Blue light on once
fully charged.
Connected Connection
连接成功
Once per 5 seconds
Power on Power on
开机
Power off
Bluetooth
disconnected
In-come call
Talking
Paired
Playing
Low Voltage
Charging
Power off
Disconnect
“zero~nine”
Connection
Battery Low
关机
连接断开
语音报号后
提示铃声
连接成功
电量不足
3.Manual:LED indication
MODE BLUE LED RED LED
ENGLISH
PROMPT
CHINESE
PROMPT
Wintory W1
7.1
1
2
3
4
5
6
7
8
9
1. Built-In Mic
2. Mic Jack
3. Line In Interface
4.Indicator Light
5.Type-C Charging Port
6.Volume -/Previous Track
7.Power ON/OFF/Stop
8.Volume＋/Next Track
9.Toggle Button For 7.1 3D
Stereo Sound
1.Product specifications:
Bluetooth chip set
Speaker Size
Speaker Impedance
Battery Capacity
Battery Type
Charging Time About 4.5 Hours
Headset
Accessories
Headset/USB Charging
Cable/Line In Connection Cable
Polymer Lithium Battery
-42±3dB
1000mAh
Charging Voltage
DC5±0.25V
Working Voltage
3.7V（3.0-4.2V）
Duration Time
Transmission distance 10m
≥12hoursWS500 V5.0
50mm