- Wire Inc. Intelligent Gateway User Guide

24
Editing your system password
If a system password has been set, the system will prompt you to enter the password when accessing any
page where you can change settings. If a password has not been set, a reminder notice is displayed in some
of the more sensitive topic areas. Setting a system password will ensure that only you are permitted to
make changes to your system settings.
Setting a password
To set your Intelligent Gateway system password:
1. Check the Enable checkbox.
2. In the Enter New Password field, enter your password.
3. In the Confirm New Password field, re-enter your password.
4. (Optional) In the Enter Your Hint field, enter a hint.
5. Click the SAVE button.
To disable password protection, deselect the
Enable checkbox and click SAVE.
Changing a password
To change your Intelligent Gateway system password:
1. In the Enter Current Password field, enter your current system password.
2. In the Enter New Password field, enter your new password.
3. In the Confirm New Password field, re-enter your new password.
4. (Optional) In the Enter Your Hint field, enter a hint.
5. Click the SAVE button.