- Wire Inc. Intelligent Gateway User Guide

81
Windows NT operating systems
Adding PCs to your network
Please note that creating a network in Windows NT is covered in the documentation that came
with your Windows NT system, in the network adapter installation section.
Accessing PCs on your network
6. Select the Shared As radio button. In the
Share Name field, enter a suitable share name
(or accept the default). In the
Access Type
field, click the radio button next to your access
preference (Read-Only, Full, or Depends on
Password). In the Password field, enter a
password if you wish to limit user access, or
leave the Password field blank for no password
required. Click
Apply and then OK to exit.
Your drive/folder will now be
shared and display the Shared
(hand) symbol:
1. To check that your are connected to the other
PCs on your network, double-click the
Network Neighborhood icon.
2. Double-click Entire Network.