User Manual

15
2.3.6 Probe outline dimensions and weight
Convex array size: 148mm (L) * 53mm (W) * 26mm (thickness)
Net weight: 170g (R50) (wC5-2Sv)
Convex array size: 148mm (L) * 73mm (W) * 26mm (thickness)
Net weight: 180g (R60) (wC5-2v)
Linear array size: 140mm (L) * 55mm (W) * 26mm (thickness)
Net weight: 140g (L40) (wL11-4v)
Linear array size: 140mm (L) * 41mm (W) * 26mm (thickness)
Net weight: 135g (L25) (wL11-4Sv)
Micro-Convex array size: 142mm (L) * 41mm (W) * 26mm (thickness)
Net weight: 140g (R15) (wC8-5v)
Endocavitary array size：325mm(L)*41mm(W)*26mm(thickness）
Net weight：160g (R10) (wE10-4v)
WAR
NING
：
Transport:
1. Do not use or store the system outside the specified
environmental conditions.
Working:
1. Please ensure that the use of the equipment to master a solid,
otherwise, equipment may hurt the patient fall.
2. To ensure that the equipment in a dry environment, the operation
of environmental temperature and humidity changes, may lead to
liquid condensation in the circuit board, there is the risk of
short circuit.
3. Do not operate the unit in an environment with flammable or
explosive liquids, vapors or gases such as oxygen or hydrogen.
Equipment failure or fan motor sparks may be electronically
detonated of these substances.
A. Please ensure that the environment before use, if the
detection of flammable substances in the environment, please do
not plug in the power or open the system.
B. Use the real-time detection environment to detect flammable
substances after the system is turned on. Do not attempt to turn
off the device or unplug the power supply. First empty the air in
the area and ensure a smooth ventilation and then turn off the
power.
4. If the system fails, please do not disassemble the view, please
contact the service center or your sales representative.