User Manual

25
ING
：
2.
When handling the probe head, make sure that the probe is closed
or frozen
CAR
EFUL
：
In order to ensure the safety of the probe, work effectively, the need
for daily inspection. Once the check to the abnormal situation, should
immediately close the probe and contact with the service
representative. If the probe will cause abnormal use of examination
results is not accurate and even harm the patient and damage the probe
itself.
Check before opening the probe
Before opening the probe, please carefully check or operate the following items：
Serial
number
Inspection items
1
Temperature, humidity and atmospheric pressure shall meet the requirements
for use.
2 The probe shall not be damaged or soiled.
3 Clean the site and the environment.
4 Probe cleaning and disinfection.
Open probe and check after open probe
Long press the power button to turn on the probe.
Check whether the probe is normally activated, refer to the following itemstoopentheprobe：
Serial
number
Inspection items
1 There shall be no abnormal sound, smell or overheating.
2 There is no obvious abnormal noise.
3
If the device is connected to the probe after the launch of the wireless signal,
check the surface of the probe in the use of abnormal heating
WAR
NING
：
1.
The use of abnormal heating probes may burn patients.
2.
If any abnormality is found, the probe is faulty. Close the probe
immediately and contact the service representative.
3.2.2 Turn off the probe
Long press the power button to close the probe.
The normal use of the need to turn off the probe, or when the probe appears someunusual
situation when the user needs to close the probe