User Manual

26
After ultrasonic examination, the ultrasonic coupling agent on the surface of the probe should be
completely erased. Otherwise, the coupling agent will be solidified on the probe head and affect
the quality of the ultrasonic image
Before and after each ultrasonic examination, the probe should be cleaned and disinfected.
3.2.3 Loading and unloading the probe
Be sure that the probe is in a closed state, the head of the loading and unloading operations.
When installing the acoustic head, align the end of the transducer with the corresponding end of
the main device and carefully push into place.
When the head is disassembled, the finger can be carefully drawn out by the convex part on the
surface of the transducer.
3.3 Connection
3.3.1 Wifi Connection
After the machine starts, select the current host corresponding to the WiFi hot spot name, on the
end device click to connect.
3.3.2 USB Connection
Windows:USB connected to the computer, Type-C connected to the probe, boot can be
automatically connected.
Android: terminal connected to the terminal equipment, Type-C end connected to the probe,
power-up can be automatically connected.