User Manual

50
7.4 Cleaning and disinfection
Probe into direct contact with the patient's components, in order to avoid infection, when a
closed detection, ultrasonic detection system, please according to the requirements of the probe
cleaning and disinfection (sterilization).
Be
careful：
1
.
For cleaning or disinfection, with antibacterial gloves to prevent
infection
2
.
After disinfection, the disinfection water is used to clean the residue,
chemical residue or harmful to animal body
3
.
If you do not guarantee the effectiveness of disinfection and
sterilization solution, please contact the manufacturer to obtain
product information
 clean
Please follow the instructions on the instructions:
A) with antibacterial gloves to prevent infection
B) cleaning the probe with water, remove the attached stains. Can also use soap and water,
cleaning can be used. Avoid using polyurethane sponge brush to avoid damage to the probe.
C) after washing, sterilizing cloth or gauze wipe not drying probe.。

General disinfection
Gently wipe the probe back and forth with a medical cotton ball dipped in 75% medical grade
alcohol

Note on disinfectant solution: dilution and concentration, the way of disinfection, and the
process of use, please refer to the instructions provided by the manufacturer regarding the
concentration of disinfectant solution, the use of disinfection methods;

After cleaning, wipe the probe with germicidal cloth or gauze, and then let the alcohol
evaporate naturally on the probe surface. Do not dry the probe.
Waring
：
1
.
Probe non-immersion equipment, Not recommended for underwater
use.
2
.
It is forbidden to immerse the probe plug in a liquid such as water
or an anti - virus solution.Immersion can cause shock or failure.
3
.
If the detector is not completely removed, it will solidify and
affect the image quality of the probe
4
.
Cleaning and disinfection will not as high temperature
environment probe (more than 55 DEG C), high temperature probe
may lead to missing or damaged.