User Manual

9
1.4 Safety warning information
In order to ensure the safety of the patient and the operator, the following safety rules should be
strictly observed in the use of the wireless ultrasonic probe.
DANGER
：
Do not use a probe in an environment where a combustible gas, such
as an anesthetic gas, hydrogen, or the like, or a flammable liquid,
such as ethanol, may cause an explosion.
WA
RNING
:
1.
Do not disassemble the ultrasonic probe, which may cause electric shock.
2.
Use the power cord supplied with this unit; use only the power supply
provided by the company to supply power, the use of other specific power
supply (such as UPS, etc.) on the ultrasonic probe power supply may bring
the risk of electric shock.
3.
Use the probe carefully, if the probe is scratched with the contact surface of
the animal body, immediately stop using the probe and contact the service
representative. If you use a scratched probe, there is a risk of electric shock
4.
Every time you use the instrument must be checked for safety, do not let the
probe by the impact of damaged ultrasound probe may cause the patient to be
shocked.
5.
Before performing an ultrasound check, check the surroundings to ensure safe
use within the environment. Do not operate the unit in an environment with
flammable or explosive liquids, vapors or gases such as oxygen or hydrogen.
6.
Be sure to wear a sterile probe case on the probe when performing an
ultrasonic chamber check.
7.
Do not immerse the ultrasonic probe Type-C interface or above in water or
disinfectant. Because the Type-C interface of the ultrasonic probe does not
have a waterproof function, this may cause an electric shock or a probe
malfunction.
8
Before and after each inspection, you must ensure that the ultrasound sound
normal. A defective ultrasonic probe may cause the patient to be shocked.
9
Please select the correct type of probe head according to the different parts of
the inspection. Do not use any probe provided by our company. Otherwise, it
will damage the machine and the probe.
10
In order to ensure safety, the charging of the system can only be carried out in
the state of shutdown, and the charging is not allowed under the power-on
state.