User's Manual

Step 2: Attach the claw arm to the bracket using bolt A (2)
and nut A (2). The nut should be facing away from where
the dish would be. Once the claw arm and bracket are
assembled, use nut B (4) and bolt B (4) to attach the
bracket to the reflector.
Step 3: Mount the reflector in the desired location on the
customer’spremise.Thefollowingpicturesshowthe
different mounting methods used with the Claw Reflector.
2000 Sunset Rd
Lake Point, UT 84074
Tel: [phone]
[ 2 ]