User's Manual

PAC Configuration Manual
Wireless Matrix Corporation #102, 1530 - 27 Avenue NE Page 62 of 62
Document # xxx-xxx-xxx Calgary, AB, Canada T2E 7S6
2002.02.01 Ph. 403.250.3949 Fax [phone] www.wrx-ca.com
Appendix A
Text file configuration.
A text file can be created to simplify configuration if multiple units will have the same
configuration. Create a text file using notepad or another text editor. Within the text file,
enter the commands to configure the PAC followed by the <enter> key. Use a terminal
program transfer or send the text file to the TPAC. In HyperTerminal, this option is found
under the menu heading “Transfer | Send Text File”.
An example of a text file is:
PAC DEBUG ON<enter>
PAC TIMEZONE -420<enter>
Do not use text files to change load new drivers. Loading drivers cause the TPAC to reboot
and the configuration will be lost.
Upgrading PAC firmware.
Any TPAC with a firmware version above 2.2X can be upgraded from a PC. The upgrade
software and latest firmware are available from Wireless Matrix Corporation upon request.