User's Manual

Wireless Matrix SDT-5000 Installation and User Guide
Doc. 020-331-0002v1.1 25/31
Sending a Test Message
After the SDT-5000 has been configured, Wireless Matrix recommends sending a test message to
the Wireless Matrix echo port to ensure the unit is operating properly.
1. Select option “3” User Message” from the Main Menu window (see figure 5) by typing “3” in
the Select field. Press the Enter key. The User Message” window (see figure 7) is
displayed.
Figure 7. User Message window
2. The window is divided into two portions, an upper portion that receives the messages and a
lower portion to compose and send messages. Enter “1” in the Select field. Press the
Enter key. The cursor moves to the Destination Address field.
3. Input the echo port address of “316520010034” or “316520020034” in the Destination
Address field.
4. Tab to the compose message field in the Send (lower) portion of the window.
5. Type a short message (7 lines or less) as displayed in figure 8.