User's Manual

Wireless Matrix SDT-5000 Installation and User Guide
Doc. 020-331-0002v1.1 4/31
Safety Precautions
Read and understand the entire manual and follow the safety instructions
WARNING!
1. Replace fuse with same type and rating for protection against fire and damage.
2. The SDT-5000 is a Radio Frequency (RF) generating device. Do not operate the unit when
anyone is in the vicinity noted in the Safety Information section of this guide. This could
result in personal injury.
3. Do NOT operate the SDT-5000 unit in areas where explosives are in use as the RF
frequency could interfere with the operation, causing hazardous conditions. Do NOT
operate the SDT-5000 unit in areas where two-way radio communications is prohibited.
4. For safety purposes, use caution when determining the SDT-5000 installation location.
CAUTION!
1. READ THIS MANUAL IN ITS ENTIRETY!
2. Keep all original Packing Materials.
3. Follow the instruction enumerated in the Installation Section of this guide to ensure proper
hardware installation.
4. Ensure that the SDT-5000 is installed in a location that will NOT affect the RF transmission.
5. Pay close attention to the electrical power installation requirements described in this guide.