User's Manual

Wireless Matrix SDT-5000 Installation and User Guide
Doc. 020-331-0002v1.1 7/31
Wireless Matrix SDT-5000
Installation and User Guide
Introduction
This guide explains procedures for installing the Wireless Matrix SDT-5000 (Modem). The SDT-
5000 itself consists of a high gain antenna, which is mounted on top of a transceiver unit. A
remote terminal unit (RTU) must be connected to the satellite modem before any communication
with a remote host can take place.
The guide does not provide detailed installation instructions for every type of location. Instead,
because of the variety of available locations, it outlines the installation process and allows the
installer to choose appropriate options.
Though the installation process is straight forward, it is important to plan your installation carefully.
By planning your installation you can avoid potential problems and determine the best approach to
installing the SDT-5000. Be aware that changes to a component’s position or mounting method
may be necessary due to variations that could not be anticipated when writing this guide. Try to
predict installation variations by reviewing the Installation Instructions section of this guide before
installing the SDT-5000 hardware.
Technical Support
Technical support is provided through your service provider. They will provide information and
answers to questions about the hardware and software described in this guide.