User manual

Multiple Unit Operation

Up to three Secure Wireless Microphones may be connected to

one radio device by use of the optional XIB Interface box ac-

cessory. Operation is identical to single user operation with the

added benet that, each party also hears each other talk when

they transmit. This functionality is ideal for police: where two of-

cers are assigned to a patrol van, or ambulance: where up to

3 paramedics can communicate at a scene as well as with their

control room. It is also ideal for ofce use allowing up to 3 person-

nel to access a local base or control station or remote control

console while moving around a building, shop or warehouse.

Note: communication between X10DR users is always routed

back through their respective X-ponder mobile chargers and not

direct between units. Ask your dealer for more information on this

unique and highly regarded operational capability.

INSTALLERS NOTE:

Use of the XBDA “booster” accessory is NOT compatible with

multiple unit installations. Multiple unit operation requires that

antennas are located ideally >1m (39”) apart to minimize the op-

portunity for cross unit interference. Attention needs to be made

when locating antennas so that each X10DR provide similar cov-

erage patterns to ensure balanced unit to unit communications.

Motorcycle Operation

The X10DR Secure Wireless Microphone is especially suitable for

motorcycle use. Models tted with a 6 pin Hirose industrial con-

nector allow easy connection to a helmet microphone and dual

earpiece t out. Making use of the handlebar PTT input, a bike

can be congured so that, when the rider is on the bike and

presses the handle bar PTT, their headset microphone audio is

sent out over the radio. Off the bike but still wearing the helmet,

the user can press the Secure Wireless Microphone PTT to talk,.

Finally, if the user removes their helmet, they can unplug from the

Hirose connector on the base of the unit and just use the Secure

Wireless Microphone like standard.