User manual

Charging your X10DR:
To charge X10DR, use only the WCL mobile or desktop charger.
When you use the WCL desktop charger to charge X10DR, make sure that the
power adapter is fully assembled before you plug it into a power outlet. Then
insert the WCL AC/DC plug pack rmly into the power outlet. Do not connect
or disconnect the WCL AC/DC plug pack with wet hands.
The WCL AC/DC plug pack may become warm during normal use. Always
allow adequate ventilation around the WCL AC/DC plug pack and use care
when handling. Unplug the WCL AC/DC plug pack if any of the following
conditions exist:
1/ The power cord or plug has become frayed or damaged.
2/ The adapter is exposed to rain, liquid, or excessive moisture.
3/ The adapter case has become damaged.
4/ You suspect the adapter needs service or repair.
5/ You want to clean the adapter.
Cleaning your X10DR:
Clean X10DR immediately if it comes into contact with any contaminants that
may cause possible malfunctions—for example, ink, dyes, makeup, dirt, food,
oils, and lotions. To clean X10DR, unplug all cables and turn off X10DR (press
and hold the manual On/Off button). Then use a soft, slightly damp cloth.
Don’t use abrasive household or industrial cleaners, aerosol sprays, solvents,
alcohol, ammonia to clean X10DR.
Connectors and Press Buttons:
Never force a connector into a port or apply excessive pressure to a button,
because this may cause damage that is not covered under the warranty. If
the connector and port don’t join with reasonable ease, they probably don’t
match. Check for obstructions and make sure that the connector matches
the port and that you have positioned the connector correctly in relation
to the port. Not all Hirose 6 pin accessories are fully compatible with X10DR.
Under some conditions, certain accessories may affect X10DR wireless perfor-
mance. Reorienting or relocating X10DR and the connected accessory may
improve wireless performance.
Acceptable Temperature Extremes:
X10DR is designed to be normally operated in temperatures between -10º
and 45ºC (14º to 113ºF) and stored in temperatures between -20º and 50ºC
(-4º to 122ºF). Low or high temperature conditions might shorten battery life
or cause X10DR to temporarily stop working correctly. Leaving X10DR in a
parked vehicle or in direct sunlight can cause X10DR to exceed these storage
or operating temperature ranges. Avoid dramatic changes in temperature or
humidity when using X10DR, as condensation may form within the unit. When
you’re using X10DR or charging the battery, it is normal for X10DR to get warm.
Driving Safely:
Use of X10DR while driving a vehicle or riding a motorbike may be distracting.
If you nd using X10DR disruptive or distracting while driving or riding, pull off
the road and park before making or answering a call. Use of X10DR alone or
with headphones (even if used only in one ear) while driving or riding is not
26