User manual

recommended and is illegal in some countries. Consider using a compatible
hands-free device with X10DR. Use of a hands-free device may be required in
some areas. Check and obey the laws and regulations regarding the use of
mobile devices like X10DR in the areas where you drive or ride.
Air Bag Equipped Vehicles:
An air bag inates with great force. Do not store X10DR or any of its accessories
in the area over the air bag or in the air bag deployment area.
Carrying and handling X10DR:
X10DR contains sensitive components. Do not drop, disassemble, microwave,
burn, paint, or insert foreign objects into X10DR. Do not use X10DR if it has
been damaged—for example, if X10DR is cracked, punctured, or damaged
by water.
27
Specications
Subject to change or improvement without notice
The equipment has been designed to meet the following global
specications:
Dimensions: 88x28x63mm (spk mic) 80x80x60 (chgr)
3.46x1.1x2.48” (spk mic) 3.15x3.15x2.36”(chgr)
Weight: 149 grams (spk mic) 125 grams (chgr)
Frequency: 2.40-2.48GHz FH Spread Spectrum
Protocol: 802.15 based
RF Power: <100mW
RF Connectors: RP SMA Female
Rated Audio/Distortion: >250mW @5% THD
Operating Voltage: 3.7VDC
Operating Temperature: -10ºC to+45ºC (extreme -20ºC to +50ºC)
14ºF to+113ºF (extreme -4ºC to +122ºF)
Shock & Vibration: Mil Std 810 C/D/E/F
Humidity/Rain/Dust: IEC529, IP55 (spk mic only)
Type Acceptance: CE, FCC, Aust/NZ
X10DR
®
N13187
FCC ID: I7OBT-24H / I7OBT-24D
0681