User's Manual

Draft
16 RT System 2 v2.0.0 Deployment Guide R00.e
© 2010-2012 Wireless Seismic, Inc. All rights reserved.
2. Layout
Laying Out the Equipment
The RT System 2 shall be used with only the supplied antennas (Table A–1
Antenna Specifications, on page 81) attached to the WRU with an integrated type
N male connector.
 The RT System 2 antennas shall be installed and handled by professionals
specifically designated for this purpose.
 Changes or modifications not expressly approved by Wireless Seismic, Inc. can
void the users’s authority to operate the equipment.
Figure 2–4 Assembling WRUs