User's Manual

Draft

R00.e RT System 2 v2.0.0 Deployment Guide 21

2. Layout

Laying Out the Equipment

3 Place the unit flat on the ground as shown in the following figure:

4 The unit will begin a series of internal and external tests. The LEDs on the top

of the unit indicate the current test and whether the unit passes or fails each

test.

Figure 2–9 Power on the Unit

Figure 2–10 Place the Unit

NOTE

See “D. LED Indicators” on page 91 for an explanation of the LED status

and error conditions.

If a WRU self test fails, the WRU will continue to the next test.

You can skip a self-test by tipping the WRU geophone down and then

returning it to the upright position (flat on the ground).