User's Manual

Draft
30 RT System 2 v2.0.0 Deployment Guide R00.e
© 2010-2012 Wireless Seismic, Inc. All rights reserved.
3. Backhaul
Backhaul Components
Refer to the Fluidmesh datasheet for FCC information and other technical
specifications on the FM1100 and FM3100 radios. See one of the following
locations for details:
 http://www.fluidmesh.com/press-room/product-literature/doc_details/160-
fluidmesh-mito-series
 “C. Fluidmesh Radio Specifications” on page 85
The Fluidmesh radios can operate on at 4.9 GHz, and 5.1 - 5.8 GHz. The preferred
frequency is configured through a user interface (see “Configure the Radios” on
page 38 for instructions).
Each radio is assigned a color that represents the channel assignment, allowing
field personnel to quickly orient the radios in the proper direction. An example is
shown in the following figure:
The Fluidmesh default IP address is 192.168.0.10.
Radio, Fluidmesh® FM3100 (75-0014) “FM3100 Radio” on page 31
Radio Install Kit (15-0036) “Radio Install Kit” on page 32
Table 3–3 Radio Kit Components (cont.)
Item Reference
Figure 3–6 Channel Color Example