User's Manual

Draft
32 RT System 2 v2.0.0 Deployment Guide R00.e
© 2010-2012 Wireless Seismic, Inc. All rights reserved.
3. Backhaul
Backhaul Components
3.2.3.3 Radio Install Kit
The following table lists the Radio Install Kit components. The remote and central
backhauls use the same install components.
The following figure illustrates the inside of the Surge Protector.
Table 3–4 Radio Install Kit
Item Reference
Surge Protector (75-0021) “Surge Protector
Connections” on page 32
Wire, 18 AWG PVC Green (65-0077)
Nail, 12 inch (70-0062)
Hose Clamp, 0.5 inch (70-0084)
Ethernet Cable, CAT5E, 3 foot, shielded (65-0104)
Figure 3–9 Surge Protector
Connections
NOTE
Install one Surge Protector for each Ethernet cable that runs down the
mast and connects to another component.