User's Manual

Draft
R00.e RT System 2 v2.0.0 Deployment Guide 39
© 2010-2012 Wireless Seismic, Inc. All rights reserved.
3. Backhaul
Configure the Radios
4 Verify that the radio powers up. The LED indicators have the following
meanings:
5 Click the Windows Start icon.
6 Select Control Panel. The Control Panel window opens.
CAUTION
Power up only one radio at a time. Never place two powered-up radios
next to each other. It is possible to damage the radio receivers if
multiple radios are powered up in close proximity.
Figure 3–16 Fluidmesh Radio Private Network
Table 3–6 Fluidmesh Radio LEDs
LED State Description
Power On / Green On whenever the radio has
power
LAN On / Green On whenever the radio has an
Ethernet connection
Signal Strength (1) On / Red Booting Core system
Signal Strength (2) On / Orange Booting wireless system
Signal Strength (3) On / Green Booting routing engine
Signal Strength (4) On / Green Booting unit configuration