User's Manual

Draft
R00.e RT System 2 v2.0.0 Deployment Guide 49
© 2010-2012 Wireless Seismic, Inc. All rights reserved.
3. Backhaul
Setting up the Backhaul Equipment
11 FM1100 only:
● Click poe pass-through in the ADVANCED SETTINGS area of the left
pane. This option allows the LAN 2 port on the radio to deliver passive PoE
to a second FM1100 on the mast using one short Ethernet cable.
● Select Enable for the Status.
● Click Apply.
3.4.4 Restore your Network Settings
When have finished configuring all of your radios, restore your network settings as
described in this section.
To restore network settings:
→ Windows computer
1 Click the Windows Start icon.
2 Select Control Panel. The Control Panel window opens.
3 Select Network and Internet.
4 Select Network and Sharing Center.
5 In the left pane, select Change adapter settings.
6 Right-click Local Area Connection and select Properties. The Properties
window opens.
7 Select Internet Protocol Version 4 (TCP/IP v4) and click Properties.
8 Select Obtain IP address automatically.
9 Click OK.
10 Click Close.
3.4.5 Using the Fluidmesh Interface to Scan
TBD
3.4.6 Using the Fluidmesh Interface to Ping
TBD
3.5 Setting up the Backhaul Equipment
Use the following procedure to erect and secure the mast