User's Manual

Draft

54 RT System 2 v2.0.0 Deployment Guide R00.e

3. Backhaul

Removing the Backhaul Equipment

2 Attach two radios to the mast. Refer to the deployment instructions for the

location at which to aim the radio. One should point towards the recording

truck (uplink), and the other should point towards the next remote backhaul

location (downlink).

3 Connect the two radios with a short Ethernet cable: Radio1/LAN 2 to Radio 2/

LAN 1.

4 Connect Radio 1/LAN 1 to the LIU.

3.7 Removing the Backhaul Equipment

TBD

3.8 Use Cases or Example Deployments

This section shows a few example deployments.