User's Manual Part 1

Draft

R01.b RT System 2 v2.3.0 Deployment Guide 69

4. Point-to-Point Backhaul

Preparation

Tool files are provided as a ZIP file. Extract the files if necessary.

The file names are as follows:

2 Configure the computer to be a private network with a static IP address of

192.168.1.100. See the Troubleshooting Guide, Additional Information chapter, Setting a

Static IP Address section if you need instructions on setting the IP address.

3 Connect a single radio to the computer.

• ubnt-discovery-

v2.3.bat

• ubnt-discovery-

v2.3.jar

•1-AP.cfg •7-AP.cfg •13-AP.cfg

•1-S.cfg •7-S.cfg •13-S.cfg

•2-AP.cfg •8-AP.cfg •14-AP.cfg

•2-S.cfg •8-S.cfg •14-S.cfg

•3-AP.cfg •9-AP.cfg •15-AP.cfg

•3-S.cfg •9-S.cfg •15-S.cfg

• 4-A P.c fg • 10-A P.c fg • 16-AP.cfg

•4-S.cfg •10-S.cfg •16-S.cfg

• 5-A P. c f g • 11-A P. c f g • 17-AP. c fg

•5-S.cfg •11-S.cfg •17-S.cfg

• 6-A P.c fg • 12-A P.c fg • 18-AP.cfg

•6-S.cfg •12-S.cfg •18-S.cfg

NOTE

When using a radio link (pendant) to the recording truck, the following

configuration files are also required:

• Recorder-AP.cfg

•Recorder-S.cfg

See “Connecting to the Recording Truck” on page 90 for more information on

using a pendant radio link.