User's Manual

R01.i RT System 2 v2.3 Deployment Guide 31
© 2010-2014 Wireless Seismic, Inc. All rights reserved.
3. Backhaul
Backhaul Components
3.2 Backhaul Components
The backhaul components are either line station (remote) backhaul components or recorder
(central) backhaul components. Line station components are the components that are not
physically located next to the recording truck. Recorder components are physically located at
the recording truck.
The following tables and figures illustrate the backhaul components.
Table 3–2 Backhaul Components, LIU, Mast, and Fiber
# EA Item Line Recorder Reference
L-1 1 LIU Kit (15-0041) Y Y
L-2 1 LIU (10-0016) Y Y “LIU” on page 38
L-3 1 Cable, LIU to Battery, yellow (60-
0034)
YY“Cable Assemblies” on page
45
L-4 An antenna is required to
communicate with the WRUs.
YY“LIU and WRU Antennas” on
page 39
L-5 A 12 V DC Battery is required, but
not included.
YY“LIU and WRU Antennas” on
page 39
M-1 1 Mast Kit (15-0046) Y Y
M-2 1 Mast (15-0051) Y Y “Mast and Base” on page 49
M-3 1
20 ft Telescoping Mast (70-
0130)
YY
M-4 1
Mast Guy Ring (70-0133)
YY
M-5 1
Bracket, Omni Antenna
(70-0136)
YY
B-1 1 Base (55-0050) Y Y “Mast and Base” on page 49
B-2 2
Knob, 10-32 x 1/2 inch
Threaded Stud (70-0137)
YY
BK-1 1 Backpack Kit (15-0014) Y Y “Setting up the Backhaul” on
page 50
BK-2 1
Backpack, Red/Grey (70-
0059)
YY
BK-3 4
Antenna Mast Guy Line, 4
mm, 15.25 m, Orange (70-
0057)
YY
BK-4 4
Tent Stake, Steel, 12 in
(70-0061) (hard ground
stakes)
YY
BK-5 4
Tent Stake, Plastic, 16 in,
Orange (70-0060) (soft
ground stakes)
YY
BK-6 5
Nail, 12 in (70-0062)
YY
BK-7 4
Guy Line Holder (70-0063)
YY