User's Manual

82 RT System 2 v2.3 Deployment Guide R01.i

4. Point-to-Point Backhaul

Final Communication Test

To run the speed test:

1 Verify that all radios are listed in the Ubiquiti Discovery Tool as described in step 4 on

page 73 through step 6 on page 74.

2 Make a note of the following IP addresses:

Ɣ The last radio in the line segment, that is, the radio farthest away from the recording

truck:

______.______.______.______

Ɣ The radio at the recording truck:

______.______.______.______

3 The speed test should be run from the recording truck radio to the radio farthest from

the recording truck. Log in to the recording truck radio as described in step 4 on page 73

through step 8 on page 74.

4 Verify that browser pop-ups are allowed:

Ź Firefox – Tools ĺ Options ĺ Content ĺ clear the Block pop-up

windows check box

ĺ click OK

Ź Internet Explorer – Tools ĺ Internet Options ĺ Privacy ĺ clear the

Turn on Pop-up Blocker check box

ĺ click OK

Ź Chrome – Settings button ĺ Settings ĺ Show Advanced Settings ĺ

Privacy area

ĺ Content Settings ĺ Pop-ups area ĺ Allow all sites to

show pop-ups

ĺ click Done

5 Click Tools

ĺ Speed Test.

6 In the Speed Test window, perform the following steps:

a Click the IP address for the radio farthest from the recording truck in the Select

Destination IP list:

Figure 4–18 Ubiquiti airOS Tools