User's Manual

Draft

RT 1000 v1.3 81 Deployment Guide R03.d

Batteries

This chapter provides information about the batteries and battery

requirements.

8.1 Lithium Ion Battery Specifications

The RT 1000 uses one or two custom intelligent lithium-ion batteries with self-

contained charging circuitry that protects the batteries from overcharge,

discharge, short circuits, or extreme temperature charging.

Battery specifications are shown in the following table:

Table 8–1 Lithium Ion Battery Specifications

Voltage Nominal 3.7 VDC

Shut-off 2.8 VDC

Full (90%) charge 4.1 VDC

Full (90%) charge

mAh

Approximately 12,000

mAh at nominal voltage

Full (90%) charge

mWh

Approximately 44,400

mWh at nominal voltage

Connector 5-pin

LED One LED that indicates

charging status when

connected to the

charging station as

follows

● Green – Charged

● Red – Charging

● Amber –

Transitional phase

between charging

and charged, or

charge

temperature

limits exceeded

Label One bar code serial

number label