User's Manual

Draft

RT 1000 v1.3 85 Deployment Guide R03.d

Legal Information

A.1 FCC Rules and Regulations Compliance

The Federal Communications Commission (FCC) regulates the use of antennas

in the “Code of Federal Regulations – Title 47, Part 15 – Radio Frequency

Devices, Subpart C – Intentional Radiators, Section 15.203 Antenna

Requirement.”

When used as intended, the RT 1000 complies with FCC Section 15.203

requirements as follows:

 The RT 1000 antennas shall be installed and handled by professionals

specifically designated for this purpose.

 Changes or modifications not expressly approved by Wireless Seismic, Inc.

can void the users’s authority to operate the equipment.

 The RT 1000 shall be used with only the supplied antennas (Table A–1)

attached to the WRU or BSU with an integrated type N male connector.

NOTE

This equipment has been tested and found to comply with the limits for

a Class A digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

Table A–1 Antenna Specifications

Model

Frequency

(MHz)

Gain

Vertical

Bandwidth

Weight

Dimension

(Length x

Diameter)

WSI 65-0067 2400-2485 9 dbi 14° 0.8 lbs

0.5 kg

27 x 0.6 in

690 x 15 mm

WSI 6060-001-01 2400-2485 7 dBi 18° 0.6 lbs

0.3 kg

21 x 0.6 in

540 x 15 mm