User's Manual

Draft
R00.e RT System 2 v2.0.0 Deployment Guide 59
© 2010-2012 Wireless Seismic, Inc. All rights reserved.
4. Demobilization
Disassemble the WRU
4 Optional: Remove batteries, antenna, or geophone as described in
“Disassemble the WRU” on page 59.
4.3 Disassemble the WRU
This section describes the process to disassemble the WRU prior to demobilization.
To disassemble the WRU:
1 Undeploy the equipment as described in “Removing the WRU from the Field” on
page 58.
2 Remove the antenna from the unit.
3 Remove the geophone from the unit.
4 Remove the batteries from the unit.
● Press the catch on the battery latch.
● Lift the lever, but do not lift the bail from the molded area on the battery.
Figure 4–2 Undeployed Unit