User's Manual

Draft

86 RT System 2 v2.0.0 Deployment Guide R00.e

C. Fluidmesh Radio Specifications

The Fluidmesh Mito Series

transmitted. The overall result is a better, more reliable, multi-service wireless

infrastructure.

Compact Design for Easy Installation

The Fluidmesh MITO Series has a compact form factor designed for low visual

impact deployments. The integrated panel antenna makes for easy installation and

supports a range of up to 30 miles in line of sight. The provided low-power POE

injector guarantees a straight-forward set-up.

FluldThrottle™

The Fluidmesh MITO Series is based on the innovative FluidThrottle™ technology

which allows the user to limit the total cost of ownership of the wireless network

by paying only for the amount of bandwidth required. Additional throughput can be

easily achieved by upgrading the system with software plug-ins in case the

bandwidth requirements increase over time. This solution makes Fluidmesh the

most cost-effective and flexible wireless solution provider in the market.

FluidMAX™

The Fluidmesh MITO Series supports the patent-pending FluidMAX™ technology

and can be used to create Point-to-Point, Point-to-Multipoint, and Mesh

architectures. Thanks to FluidMAX™, the Fluidmesh MITO Series can operate with

a centralized medium access control protocol, or with a distributed medium access

control protocol, depending on the network layout. That means that our units can

operate in either CSMA or TDMA. The decision is made automatically by the

network based on its layout and requires no user intervention.

EasyMesh® Platform and FMQuadro Interface

The Fluidmesh MITO Series includes EasyMesh™. The EasyMesh technology allows

the user to set the same range of private IP addresses across the entire network.

The Fluidmesh MITO Series also includes the FMQuadro™ web interface which

allows the user to configure, monitor, and troubleshoot the wireless network in real

time without the need of additional software or a server. The unit comes with a

built-in spectrum analyzer, a real-time bandwidth monitoring tool, and a wizard to

facilitate the configuration of the system.

AES-128 Encryption Support (FIPS-197 Compliant)

The Fluidmesh MITO Series includes support for 128 bit AES Encryption at the link-

level which can be used for FIPS-197 compliance. Because AES Is Implemented in

hardware, there is no loss in terms of performance when AES is enabled.

Simple Network Management Protocol (SNMP) Support

The Fluidmesh MITO Series supports SNMP version 3. The Simple Network

Management Protocol allows the user to centrally manage the mesh devices with a

SNMP server and to receive automatic alarms in case of network failure.