Installation Manual

CONFIDENTIAL UNDER NON-DISCLOSURE AGREEMENT (NDA)

Rev A1

Document:

WSS 4G Aircraft Installation Manual 750-

00003-00 Reva1.Docx

July -30

2020

NOTE: The ABR has two transmitters and only one transmitter is operational and

connected to the antenna when the other transmitter is terminated with 50Ω and

software disabled. The purpose of that is PA redundancy.

Tx2 (J8) is connected and enabled

Tx1 (J9) is terminated and disabled

Tx1 (J9) is connected and enabled

Tx2 (J8) is terminated and disabled

NOTE: The ABR has two identical transceivers (AD9375) from Analog Devices.

RF EXPOSURE STATEMENTS

Exposure to radio frequency during wireless operation: Based on the FCC RF exposure

compliance requirements, the separation distance between a wireless antenna and any

person’s body must be at least 6 inches [15.3 cm].

To comply with FCC RF exposure compliance requirements, the antenna used for this

transmitter must be installed to provide a separation distance of 6 inches [15.3 cm] from

all persons and must not be co-located or operating in conjunction with any other

antenna or transmitter.