Cut Sheet

Single Service Fittings for Infloor Systems
Wiremold
®
1200 Series
™
Service Fittings are bell-
cap style pedestal fittings used in single service
power and communication applications. The split
bell cap design protects the electrical or
communication cabling exiting the fitting from
damage. Multiple fittings are required for two or
more services.
1200 Series Service Fittings are designed to be
threaded directly into a 2" IPS [51mm] preset or
afterset insert to activate Walkerduct
®
Underfloor
Duct. It can also be applied as an afterset on
Walkercell
®
Cellular Raceway. 1200 Service
Fittings are suitable for new and renovation
construction and is available in aluminum and
brass finishes. All power fittings are UL listed to
U.S. safety standards.
F E A T U R E S & B E N E F I T S
■ Split bell cap with grommet. The cap splits into two
pieces to surround a power cord and plug or
communication cable. It helps to keep wiring connections
from being disconnected while in service. The grommet
provides a protected exit for wiring.
■ Brushed finish. Brass or aluminum material is durable
and maintains its good looks even after years of service.
■ Removable bell cap. The fitting can be used without bell
cap where a flush activation is desired.
The bell-cap, pedestal
style components of 1200
Series Service Fittings.
A 1200 Series Service Fitting installation on a carpeted floor.
1200 Series
™
Pedestal Style Service Fittings
ED666R5 – Updated March 2011 – For latest specs visit www.legrand.us/wiremold