Cut Sheet

2600 Overfloor Raceway Fittings
2600 Overfloor Raceway Fittings
Catalog No./Item Description/Specifications
2600WC Wire Clip – For holding conductors
in place.
2602 Fiber Bushing – Protects wires
from abrasion. Bushing slips into
open end of 2600 where it enters
a fitting.
2611 90° Flat Elbow – For right angle
turns on same surface.
2617T Telephone Elbow – Used at
beginning of run at wall, at end of
run, and along run (two fittings
back to back, with backs removed
at score) where cable is brought
out and back to continue run.
Cover has two twistouts and
base is scored for quarter-round
baseboard molding. Max. Capacity:
two 25 pr. telephone cables. Not
UL Listed.
2642D Junction Box – May be used with
1500 and/or 2600 as a cross, tee,
or elbow. Cover has 1/2" [12.7mm]
trade size KO. Base has 1/2"
[12.7mm] and 3/4" [19mm]
concentric KO to enable connection
to floor, outlet boxes, or under floor
duct systems (use chase nipple –
not included). Two 2600WC wire
clips included.
1543GL Grounding Duplex – Cover has
1500 and 2600 twistouts on all four
sides. Base has 1/2" [12.7mm] and
3/4" [19mm] concentric KOs. Two
1500WC Wire Clips included.
Catalog No./Item Description/Specifications
1546A Single Receptacle Box – Accom-
modates commercially available
straight blade and locking single
receptacles with face diameters
of 1.38-1.40" [34.5-35mm]. Base
has 1/2" [12.7mm] and 3/4" [19mm]
trade size concentric KOs. Cover
has 1500 and 2600 twistouts on
all four sides. Two 1500WC wire
clips included.
1546B Duplex Receptacle Box –
Accommodates commercially
available 15A or 20A duplex
receptacles. Base has 1/2"
[12.7mm] and 3/4" [19mm]
concentric trade size KOs.
Cover has 1500 and 2600
twistouts on all four sides. Two
1500WC wire clips included.
Side wiring recommended.
1546T Telephone Outlet Box –
Furnished with 1/2" [12.7mm]
rubber stem. Accepts modular
connecting blocks within the
fitting. Cover has 1500 and
2600 twistouts on both ends
and both sides. Two 1500WC
wire clips included. Not UL Listed.
2657T Telephone Service Fitting –
Cover has 1500 and 2600 twistouts
on one end. Use to house 25 pr.
telephone connector. Two rubber
grommets furnished. Holecut base
enables mounting to 4" [102mm]
wall box. Not UL Listed.
2186 Adjustable Offset – Has
twistouts for 2100 and 2600 on
each end. Base has Connector
3/4" [19mm], 1" [25mm] and
1"[25mm] elongated knockouts.
Use for 90° internal corners for
2600, transition from 2600 to 2100,
or for connection to panel boxes.
3/4"
[19mm]
4"
[102mm]
2 5/8"
[67mm]
2 3/4"
[70mm]
2 7/32"
[56.6mm]
1"
[25mm]
5" dia.
[127mm]
1 5/16"
[33mm]
5 1/16"
[129mm]
3 1/16"
[78mm]
1 5/16"
[33mm]
1.405" dia.
[36mm]
5 1/16"
[129mm]
3 1/16"
[78mm]
1 5/16"
[33mm]
5 1/16"
[129mm]
3 1/16"
[78mm]
1 5/16"
[33mm]
5 1/16"
[129mm]
3 1/16"
[78mm]
3"
[76mm]
6 1/2"
[165mm]
13/16"
[20.6mm]
1 1/4"
[32mm]
1"
[127mm]
1 9/16"
[39mm]
2 1/2"
[64mm]
3 1/2"
[189mm]
2600 Base and Cover
Catalog No./Item Description/Specifications
2600 Base and Cover – Cover: .050"
[1.25mm] galvanized steel. Base:
.040" [1mm] galvanized steel.
Packed (5) 10 ft. [3.050m] lengths
per carton. Base has 9/32" [7.1mm]
dia. mounting holes on centers of
approximately 8" [203mm].
23/32"
[18.2mm]
2 7/32"
[56mm]