Cut Sheet

7
2344SD-2A
Communication
Inserts
5507 Series Faceplate
2344SD-2 Over-the-Raceway Box Application
Catalog No./Item Description/Specifications
2348D Device Box – For use with
2300BACD Divided Raceway. For
mounting standard switches,
receptacles and industry
standard faceplates for
communication devices.
Accepts NEMA Faceplates.
2344D Extra Deep Device Box – For use
with 2300BACD Divided Raceway
when additional depth is required.
For mounting standard switches,
receptacles and industry standard
faceplates for communication
devices. Accepts NEMA Faceplates.
Catalog No./Item Description/Specifications
2344SD-2A Two-Gang Deep Divided Box –
A divided two-gang box for use
with 2300D Series Raceway.
Provides the ability to have both
power and low voltage at a single
point of use. Accepts 5507 Series
Faceplates, Ortronics
®
TracJack &
Series II Modules, Pass & Seymour
®
Activate
™
Series Inserts, and
Wiremold Open System
Communication Modules.
The 2300BAC and 2300BACD Series Divided Raceway Box family provides two unique benefits; labor savings with “over-the-
raceway” installation and Sure-Snap
®
device boxes. The 2348D and 2344D “over-the-raceway” design eliminates cutting the
raceway base to mount boxes. The base snaps on anywhere along the raceway. The Sure-Snap integral device box of the
2344SD-2A combines aesthetics with labor savings. 5507 Series Faceplates, Pass & Seymour Activate Inserts, Wiremold Open
System Communication Modules and Ortronics Series II and TracJack Modules snap directly into the Sure-Snap Device Box,
eliminating the need for additional faceplates. The single-gang boxes accept standard NEMA faceplates.
4 3/4"
(121mm)
4 3/4"
(121mm)
3"
(76mm)
4 7/8"
(124mm)
1 3/4"
(44mm)
2 1/4"
(57mm)
4 3/4"
(121mm)
3"
(76mm)
2 3/4"
(70mm)
Sure-Snap® Device Boxes for 2300BACD Divided Series Raceway Ordering Information
Note: Not for use with NEMA Faceplates. CM-EPLA End
Plates are required when using Wiremold Open System
communication modules and Pass & Seymour
®
Activate
inserts. S2-EPL End Plates are required when using
Ortronics
®
Series II inserts. To mount Ortronics
®
TracJack modules, use 5507-4TJ or 5507-6TJ Faceplates.
Sure-Snap
®
Device Boxes for 2300BACD Divided Series Raceway