Cut Sheet

10
Catalog No./Item Description/Specifications
V24DWND Downward Duplex Device
24DWND-FW Bracket – Labor saving over-the-
raceway device bracket. For 15A
or 20A duplex receptacles or
106 style data frame in 2400D
Series Raceway.
V24DWNR Downward Decorator Device
24DWNR-FW Bracket – For 15A and 20A
decorator/GFCI receptacles or
106 style data frame in 2400D
Series Raceway.
V24DWNU Downward Extron
®
MAAP
24DWNU-FW Device Plate – Accepts two
Extron
®
Electronics MAAP single
space modules. Raceway base
must be cut.
V24DWNS Downward Ortronics
®
Series II
24DWNS-FW Device Plate – Accepts one
Ortronics
®
Series II module.
Raceway base must be cut.
V2444D Device Box – One-gang,
2444D-FW labor saving, over-the-raceway box
for use with 2400D Series Raceway.
Cover has two twistouts for 2400D
Series Raceway. Accepts industry
standard faceplates for electrical
and communication devices.
V2444D-2A Divided Device Box – Divided
2444D-2AFW two-gang, labor saving, over-the-
raceway box for use with 2400D
Series Raceway. Provides the ability
to have both power and low voltage
at a single point-of- use. Accepts
5507 Series Faceplates, Ortronics
®
TracJack & Series II Modules
(requires S2-EPL Plate), Pass &
Seymour Activate Series Inserts
(requires CM-EPLA Plate) and
Wiremold CM2 Series Open System
Communication Modules (requires
CM-EPLA Plate).
2 3/4"
(70mm)
2 7/8"
(73mm)
4 5/8"
(117mm)
Catalog No./Item Description/Specifications
V2444D-2N Divided Box – Labor savings
2444D-2NFW over-the- raceway box. A divided
two-gang box for use with 2400D
Series Raceway. Allows both power
and low voltage at a single point-
of-use. For use with commercially
available faceplates (not supplied).
V2450 Device Bracket –
2450-FW For use with 2444D-2N for both
power and low voltage at a single
point of use. Accepts 5507 Series
Faceplates, Ortronics
®
TracJack &
Series II Modules (requires S2-EPL
Plate),Pass & Seymour Activate
Series Inserts (requires CM-EPLA
Plate) and Wiremold CM2 Series
Open System Communication
Modules (requires CM-EPLA Plate).
V2475D Bridge Fitting – For allowing
2475D-FW 2400D Series Raceway to bridge
over existing installations of 2400,
2400D, 500, and 700 Series
Raceways.
V4089 Reducing Connector –
For reducing from 4000
Series Raceway to 2400D
Series Raceway.
2400 Series Divided Raceway Fittings Ordering Information (continued)
4 3/4"
(121mm)
1 5/8"
(41mm)
2"
(51mm)
4 3/4"
(121mm)
4 3/4"
(121mm)
2 3/4"
(70mm)
4 5/8"
(118mm)
3/8"
(9.5mm)
4 5/8"
(118mm)
4 3/4"
(120mm)
2 1/8"
(54mm)
4 3/4"
(120mm)
2 1/8"
(54mm)
5 9/16"
(140mm)
1 7/8"
(48mm)
2 7/8"
(74mm)
NOTE: “V” prefix indicates Ivory color, “-FW” suffix indicates
Fog White color.
4 3/4"
(121mm)
2 1/8"
(54mm)
2 3/4"
(70mm)
4 3/4"
(121mm)
4 3/4"
(121mm)
2 1/8"
(54mm)