Cut Sheet

ManualsBrandsWiremold ManualsConduit90° Flat Elbow, 2800 Series Raceway, Non-Metallic,White

n One-piece design with adhesive backing. Easy to

handle. Makes installation quick and easy.

n Available in three low profile sizes, in both 6' & 8'

(1.8m & 2.4m) lengths. Allows flexibility for cabling

requirements. Six- and eight-foot (1.8m and 2.4m)

lengths minimize cutting, cover clips, and scraps.

n Three standard colors. Stock colors are ivory, white,

and fog white (matches with Ortronics

White). Consult

factory for custom colors. Paintable using latex paint.

n Durable, flexible hinge construction. Allows for

repeated openings and closings while maintaining

product integrity and aesthetics. Easy open and

snap-close latch facilitates installations, moves,

and changes.

n Durable, impact-resistant PVC construction. Easy to

cut and trim.

n Full range of fittings. Surface mount boxes and multiport

workstation outlets makes installations quick and easy.

n Bend radius compliant fittings for 2800 and 2900

Series Raceways. Maintain 1 1/4" (32mm) bend radius

control required for UTP and fiber optic cable.

n Datacom connectivity options. Accepts industry

standard and proprietary devices from a wide range of

manufacturers to provide a seamless and aesthetically

pleasing interface for voice, data, audio, and video

applications at the point of use.

Uniduct

Series 2700, 2800, 2900 Latching

Raceway Systems are one-piece, single channel,

nonmetallic raceways ideally suited for routing and

protecting fiber optic, UTP, and other low-voltage

(50V or less) cabling in an easy to install, aestheti-

cally pleasing application.

Uniduct Series 2800 and 2900 Raceway radiused

fittings (FO) maintain 1 1/4" (32mm) bend radius

control and are the perfect solution for even the

most demanding cabling applications.

WIREMOLD

Uniduct Series Raceway

One-Piece, Nonmetallic, Latching Raceway

For Low Voltage Applications

FEATURES & BENEFITS

ED264R8 – Updated January 2016 – For latest specs visit www.legrand.us/wiremold

The Uniduct Raceway

design features a

co-extruded flexible PVC hinge

that prevents cracking and

splitting even after numerous

openings and closings.

Uniduct

2700 Series Raceway

Uniduct

2800 Series Raceway

Uniduct

2900 Series Raceway

Summary of content (8 pages)

PAGE 1
WIREMOLD® Uniduct Series Raceway One-Piece, Nonmetallic, Latching Raceway For Low Voltage Applications Uniduct ® Series 2700, 2800, 2900 Latching Raceway Systems are one-piece, single channel, nonmetallic raceways ideally suited for routing and protecting fiber optic, UTP, and other low-voltage (50V or less) cabling in an easy to install, aesthetically pleasing application.
PAGE 2
Uniduct Latching Raceway System Layout F I B G E C A H C D NOTE: Illustration is for showing product applications only. A — Blank End Fitting B — Cover Clip C — Tee Fitting D — Multimedia Box E — External Elbow 2710B, 2810B, 2910B 2706, 2806, 2906 2715, 2815, 2915 CM-MMB-291, CM-MMB-292, CM-MMB-293 2718, 2818, 2918 F — Drop Ceiling Connector G — Internal Elbow H — Flat Elbow I — Device Box Download this product’s PEP ecopasport® environmental product declaration at www.legrand.
PAGE 3
Wire Fill Capacity Charts Uniduct 2700 Series Raceway Wire Fill Capacity Chart CABLE/WIRE SIZE UNSHIELDED TWISTED PAIR 4-pair, 4-pair, 4-pair, 4-pair, 25-pair, 24 AWG Cat. 3 24 AWG Cat. 5e 24 AWG Cat. 6 24 AWG Cat. 6a* 24 AWG COAXIAL RG6/U FIBER Zip Cord Round 4 Strand Fiber Round 6 Strand Fiber O.D. (Approx. Dia.) Inches (mm) 0.190 0.210 0.250 0.354 0.410 40% FILL (4.8) (5.3) (6.3) (8.9) (10.4) 2 1 1 0 0 0.270 (6.9) 1 0.118 x 0.236 0.187 0.256 (3 x 6) (4.8) (6.
PAGE 4
Uniduct Raceway Profiles Uniduct Latching Raceway – One-piece latching raceway with co-extruded design, smooth plastic finish. Available in both 6' and 8' (1.8m and 2.4m) lengths. 2900/2900L8 2800/2800L8 2700/2700L8 3/8" (9.5mm) 1/2" (12.7mm) 3/4" (19.1mm) 3/4" (19.1mm) 1" (25mm) 1 1/2" (38mm) Fittings for Uniduct Latching Raceway Catalog No./Item 2706 2806 2906 Description/Specifications Cat. No. 2706 1" (25mm) 2806 1 1/2" (38mm) 2906 2" (51mm) Cat. No.
PAGE 5
Fittings for Uniduct Latching Raceway (continued) Catalog No./Item 2817FO 2917FO B A Description/Specifications Catalog No./Item Description/Specifications Bend Radius Compliant Internal Elbow – Makes right angle turns around internal corners. Maintains 1 1/4" (32mm) bend radius control when installing UTP and fiber optic cable. 2889 educing Connector R (2800 – 2700) – Makes transition from 2800 Series Raceway to 2700 Series Raceway. Cat. No. 2718 2818 2918 A 3/4" (19.
PAGE 6
Uniduct Communication & Device Box Compatibility Uniduct boxes with Pass & Seymour Activate™ Inserts. Activate Inserts can be mounted flush or angled, on either one-gang or two-gang boxes depending on the application. Bend Radius Compliant Fittings for 2800 and 2900 Series Raceways. Maintain 1 1/4" (32mm) bend radius when installing UTP and fiber optic cable. For ease of installing cables, the base has cable retention fingers that hold the cables in place until the cover is installed.
PAGE 7
NOTES 7
PAGE 8
NOTES Electrical Wiring Systems 60 Woodlawn Street West Hartford, CT 06110 Phone: 1.877.BY.LEGRAND (295-3472) www.legrand.us ED264R8 – Updated January 2016 – For latest specs visit www.legrand.us/wiremold © Copyright 2016 Legrand All Rights Reserved 570 Applewood Crescent Vaughan, Ontario L4K 4B4 Phone:905.738.9195 www.legrand.