Cut Sheet
Catalog No./Item Description/Specifications
2715 Tee – Makes right angle branches of
2815 2700, 2800, or 2900 Series Raceway.
2915
2815FO Bend Radius Compliant Tee –
2915FO Makes right angle branches of 2700,
2800, or 2900 Series Raceway.
Maintains 1 1/4" (32mm) bend radius
control when installing UTP and fiber
optic cable.
2717 Internal Elbow – Makes right angle
2817 turns around internal corners.
2917
4
Catalog No./Item Description/Specifications
2706 Cover Clip – Covers joint where
2806 sections of 2700, 2800 or 2900
2906 Series Raceway Cover come together.
2710B Blank End Fitting – Closes off
2810B open ends of 2700, 2800 or 2900
2910B Series Raceway.
2711 90° Flat Elbow – Makes right angle
2811 turns on same surface.
2911
2811FO Bend Radius Compliant Flat Elbow –
2911FO Makes right angle turns on the same
surface. Maintains 1 1/4" (32mm)
bend radius control when installing
UTP and fiber optic cable.
A
NOTE: No suffix denotes Ivory finish. Add “-WH” suffix for White
finish and “-FW” suffix for Fog White finish.
A
A
Fittings for Uniduct Latching Raceway
Cat. No. A
2706 1" (25mm)
2806 1 1/2" (38mm)
2906 2" (51mm)
Cat. No. A
2710B 1" (25mm)
2810B 1 3/8" (35mm)
2910B 1 3/4" (44mm)
Cat. No. A
2711 1 1/2" (38mm) Each Leg
2811 2" (51mm) Each Leg
2911 2 3/4" (70mm) Each Leg
A
B
Cat. No. A B
2811FO 3" (76mm) 2 1/4" (57mm)
2911FO 3 1/2" (89mm) 2 1/4" (57mm)
B
A
Cat. No. A B
2700 11/16" (17mm) 2 3/16" (56mm)
2800 7/8" (22mm) 2 7/8" (73mm)
2900 1 1/8" (29mm) 3 7/8" (98mm)
A
C
D
B
Cat. No. A B C D
2815FO 1 15/16" (49mm) 5" (127mm) 1 1/4" (32mm) 3 1/2" (89mm)
2915FO 1 15/16" (49mm) 5 1/2" (140mm) 1 1/4" (32mm) 4" (102mm)
A
Cat. No. A
2717 1 1/4" (32mm) Each Leg
2817 1 1/2" (38mm) Each Leg
2917 2 1/4" (57mm) Each Leg
3/8"
(9.5mm)
3/4"
(19.1mm)
1/2"
(12.7mm)
1"
(25mm)
Uniduct Raceway Profiles
Uniduct Latching Raceway – One-piece latching raceway with co-extruded design, smooth plastic finish.
Available in both 6' and 8' (1.8m and 2.4m) lengths.
2700/2700L8
2800/2800L8
3/4"
(19.1mm)
1 1/2"
(38mm)
2900/2900L8