Cut Sheet

F
C
B
A
E
C
D
H
G
I
J
2
Uniduct 2700, 2800, 2900 Series Latching Raceway System Layout
NOTE: Illustration is for showing product applications only.
A —2710B, 2810B, 2910B Blank End Fitting
B —2706, 2806, 2906 Cover Clip
C —2715, 2815, 2915 Tee Fitting
D —CM-MMB-293 Multimedia Box
E —2718, 2818, 2918 External Elbow
F —2786, 2886, 2986 Drop Ceiling Connector
G —2717, 2817, 2917 Internal Elbow
H —2711, 2811, 2911 Flat Elbow
I —NM2048 Device Box
J—
CM2, Series II, Tracjack Communication Device
NOTE: Wire capacity is reduced to allow for proper conductor bend radius and maximum permissible heat rise.
* Category 6 augmented (6a) cable for 10 gigabit ethernet – max allowed cable diameter per addenda No. 11 ANSI TIA/EIA 568-B.2.
CABLE CATEGORY/ O.D. 2700 RACEWAY 2800 RACEWAY 2900 RACEWAY
TYPE DESIGNATION Inches [mm] 40% FILL 40% FILL 40% FILL
UNSHIELDED 4-pair, 24 AWG Cat 3 0.190 [4.8] 2 4 12
TWISTED PAIR 4-pair, 24 AWG Cat 5e 0.210 [5.3] 1 3 10
4-pair, 24 AWG Cat 6 0.250 [6.3] 1 2 7
4-pair, 24 AWG Cat 6a* 0.354 [8.9] 0 1 3
25-pair, 24 AWG 0.410 [10.4] 0 1 2
COAXIAL RG6/U 0.270 [6.9] 1 2 6
FIBER ZipCord 0.118 x 0.236 [3 x 6] 2 4 12
Round 4 Strand Fiber 0.187 [4.8] 2 4 12
Round 6 Strand Fiber 0.256 [6.5] 1 2 6
Uniduct 2700, 2800, 2900 Series Latching Raceway Wire Fill Capacity Chart