Cut Sheet

Catalog No./Item Description/Specifications
V4010DFO Divided Entrance End Fitting –
G4010DFO Has concentric 3/4", 1", and
1 1/4" trade size KOs on end
a
nd bottom for feeding 4000
Raceway. Furnished with
removable divider and
1 1/4" [32mm] bend radius
controlled insert.
V4011FO FiberReady 2" [51mm]
G4011FO Radius Full Capacity Flat
Elbow – A 90° flat corner
for divided and undivided
applications for new lay-in
or pull-through installations.
V4011 Flat Elbow – For right angle
G4011 turns on the same surface.
V4012TX Internal or External 45°
G4012TX Elbow – Can also be
assembled as an inverted
45° elbow.
V4014A Wall Box Connector – Base
G4014A has two concentric 1/2", 3/4",
1", and 1 1/4" trade size KOs,
and two rectangular 2 9/16" x
1 11/16" [65mm x 43mm] KOs.
V4015 Full Capacity Tee – For
G4015 undivided raceway only. Join
to raceway run with G4001
Couplings (not furnished).
V4015D Divided Tee – For divided
G4015D raceway only. Join to raceway
run with G4001 Couplings
(not furnished).
V4015FO FiberReady 2" [51mm]
G4015FO Radius Full Capacity Tee –
A full capacity undivided
tee fitting. For new lay-in or
pull-through installations.
Catalog No./Item Description/Specifications
G4000WC Wire Clip (Plated) – For holding
conductors in place.
4001A Coupling (Galvanized Steel
Plated) – For joining lengths
of G4000B. Sold in pairs.
4011DRI 2" [51mm] Radius Insert for
Divided Flat Elbow – Insert
for V/G4011 Flat Elbow that
provides a 2" [51mm] bend
radius for UTP/STP or fiber
optic cable installations.
4015DRI 2" [51mm] Radius Insert for
Divided Tee – Insert for
V/G4015D Divided Tee that
provides a 2" [51mm] bend
radius for UTP/STP or fiber
optic cable installations.
4011/15RI 2" [51mm] Radius Corner
Insert – Insert for V/G4015
Undivided Tee that provides a
2" [51mm] bend radius for
UTP/STP or fiber optic cable
installations.
4017/18RI 2" [51mm] Radius Insert for
Internal/External Elbows –
Insert for V/G4017 Internal
Elbow and for V/G4018
External Elbow that provides
a 2" [51mm] bend radius for
UTP/STP or fiber optic
cable installations.
4001DA Divider Clip (Plated) –
Required for holding
G4000D Divider in place.
Use one every 2 1/2' [0.762m].
V4010B Blank End – For closing open
G4010B end of 4000 Base. Has two
1/2" trade size KOs.
V4010DFC Full Capacity Entrance
G4010DFC End Fitting – Full Capacity
Entrance End Fitting for
V/G4000 Raceway. Includes
four 1" and 1 1/4" concentric
trade size knockouts. Requires
4001A Coupling (sold
separately).
1"
[25mm]
4 1/2"
[114mm]
1 1/2"
[38mm]
1
"
[
25mm]
1
1/2"
[
38mm]
2 1/2"
[64mm]
3
1 1/4"
[32mm]
2 3/4"
[70mm]
5 1/4"
[133mm]
4 3/4"
[121mm]
6
1/2"
[
165mm]
1
3/4"
[
44mm]
4
3/4"
[
121mm]
8 3/4"
[222mm]
1 3/4"
[44mm]
Assembled as internal elbow.
1 1/2"
[38mm]
1 1/8"
[29mm]
12"
[305mm]
10"
[254mm]
12"
[305mm]
10"
[254mm]
12"
[305mm]
4000 Series Raceway Fittings Ordering Information
12 3/4"
[324mm]
9"
[229mm]
1 3/4"
[44mm]
4 3/4"
[121mm]
6"
[152mm]
2 3/4"
[70mm]