Cut Sheet

2
40N2F11
40N2F06
40N2F19
40N2F31
40N2F15
40N2B08
40N2F20
40N2F14
PSB1
40N2F05
40N2F17
40N2C08
40N2F31
40N2F21
NOTE: Illustration is for showing product applications only.
40N2 Series Raceway System Layout
40N2 Series Raceway Wire Fill Capacities
NUMBER OF MAX. NUMBER OF
WIRE SIZE O.D. CONDUCTORS CONDUCTORS BOTH
THHN/THWN Inches (mm) Comp. A Comp. B COMPARTMENTS
Power 14 AWG 0.111 (2.8) 20 20 28
Wiring 12 AWG 0.130 (3.3) 18 18 36
With or 10 AWG 0.164 (4.2) 17 17 24
Without 8 AWG 0.216 (5.5) 15 15 20
Devices 6 AWG 0.254 (6.5) 5 5 10
CABLE CATEGORY/ O.D. Section C Section D
TYPE DESIGNATION Inches (mm) 40% Fill* 40% Fill*
UNSHIELDED 4-pair, 24 AWG Cat 3 0.190 (4.8) 45 24
TWISTED PAIR 4-pair, 24 AWG Cat 5e 0.210 (5.3) 37 19
4-pair, 24 AWG Cat 6 0.250 (6.3) 26 13
4-pair, 24 AWG Cat 6a** 0.354 (9.0) 13 6
25-pair, 24 AWG 0.410 (10.4) 9 5
COAXIAL RG6/U 0.270 (6.9) 22 11
FIBER ZipCord 0.118 x 0.236 (3 x 6) 103 55
Round 4 Strand 0.187 (4.8) 46 24
Round 6 Strand 0.256 (6.5) 25 13
40N2 RACEWAY WIRE FILL CAPACITIES FOR DATA/COMMUNICATIONS
40N2 RACEWAY WIRE FILL CAPACITIES FOR POWER
Section A
3.22 in.
2
(2080mm
2
)
Section B
1.71 in.
2
(1100mm
2
)
Section C
3.22 in.
2
(2080mm
2
)
Section D
1.71 in.
2
(1100mm
2
)
4.0"
(102mm)
2.0"
(51mm)
* 40% cable fill is the maximum designed cable fill based on TIA/EIA 569-A.
** Category 6 augmented (6a) cable for 10 gigabit ethernet – max allowed
cable diameter per addenda No. 11 ANSI TIA/EIA 568-B.2.