Cut Sheet

4
Catalog No./Item Description/Specifications
40N2F55 High Capacity Device Box–
Required for mounting power or
datacom devices into a divided
raceway application. Use one per
device location.
40N2F74* Divided Transition Fitting – Makes
transition from 40N2 Series
Raceway to PN03, PN05, and
PN10 Series Raceways.
Catalog No./Item Description/Specifications
40N2F21* Divided Entrance End Fitting –
Divided fitting to feed 40N2 Series
Raceway. Includes 3/4", 1", 1 1/4",
and 1 1/2" trade size KOs on
back and top.
40N2F31* Twin Cover Device
Bracket – Use for power or
communications devices in a
single compartment. Accepts
5507 Series Faceplates. For use
with: Ortronics TracJack Individual
Jack System, Ortronics Series II
Front-Loading, Module System,
Pass & Seymour Activate
Series Front-Loading Inserts,
and Wiremold CM2 Series Open
System Communication Modules.
*Add “V” suffix for Ivory finish or “WH” suffix for White finish.
40N2 Series Raceway Fittings
6"
(152mm)
7 5/16"
(186mm)
5 1/4"
(133mm)
1 3/16"
(30mm)
6 3/8"
(162mm)
2 3/16"
(56mm)
2 15/16"
(74mm)
6 1/8"
(156mm)
NOTE: CM-EPLA End Plates are
required when using Wiremold
communication modules and Pass
& Seymour inserts. S2-EPL End
Plates are required when using
Ortronics Series II inserts. To
mount Tracjack inserts, use
5507-4TJ or 5507-6TJ Faceplates.
CONNECTION REQUIRED
FROM TO CAT. NO.
1/2" or 3/4" trade size conduit 40N2 40N2F20
or armored cable
3/4", 1", 1 1/4" & 1 1/2" 40N2 40N2F21
trade size conduit or armored cable
40N2 Series Raceway PN03, PN05, 40N2F74
PN10, PN20
TRANSITION FITTINGS TO EXISTING
WIRING OR OTHER WIREMOLD RACEWAYS