Cut Sheet
Catalog No./Item Description/Specifications
5507FRJ* Flush
Dual RJ11/RJ45
Faceplate – Same as
5507RJ except the connectors
are recessed to provide a
flush installation.
5507-4TJ*
Ortronics
®
Faceplate – Mounts
Ortronics datacom inserts. Accepts
four Ortronics TracJack Devices.
5507-6TJ*
Ortronics
®
Faceplate – Mounts
Ortronics datacom inserts. Accepts
six Ortronics TracJack Devices.
CM-EPLA*
End Plates – I
ncludes two outlet
identification labels with clear covers
and two matching screw covers.
Required for mounting Pass &
Seymour Activate and Wiremold CM2
Series Open System communication
modules into 40N2 Series
device brackets.
S2-EPL*
End Plates – I
ncludes two outlet
identification labels with clear
covers and two matching screw
covers. Required for mounting
Ortronics Series II modules into
40N2 Series device brackets.
CM-ARA* Angled Raceway Adapter – For
use with multi-channel raceway
device brackets and WallSource
device mounting brackets. Angled
exit provides additional mounting
depth required for A/V connections
as well as ensuring the required
bend radius for UTP and fiber optic
cabling. Holds two CM2 Series
modules or two Pass & Seymour
®
2A inserts. Fits 5507 Series
Faceplate opening.
ARA-S2*
Angled Raceway Adapter – For
use with multi-channel raceway
device brackets and WallSource
device mounting brackets. Angled
exit provides additional mounting
depth required for A/V connections
as well as ensuring the required
bend radius for UTP and fiber optic
cabling. Holds two Ortronics
®
Series II modules.Fits 5507 Series
Faceplate opening.
Catalog No./Item Description/Specifications
5507AD*
Modular Furniture Adapter –
Mounts Activate modular
furniture bezels and other modular
furniture adapters. Not for use
with rectangular (decorator)
style devices.
5507B*
Blank Faceplate – Covers unused
compartments in device brackets.
5507D*
Duplex Faceplate – Covers duplex
style devices. Accepts 106 Frame.
5507R*
Rectangular Faceplate – Covers
rectangular style devices.
5507S*
Rectangular Spacer – Mounts
commercial device plates. Installs
between the device bracket and
the device.
5507SW*
Switch Faceplate – Covers
standard toggle switches.
5507T1*
Single Receptacle Faceplate –
Covers single receptacles – 1.59"
(40.4mm) diameter.
5507T2*
Single Receptacle Faceplate –
Covers single receptacles –
1.41" (35.8mm) diameter.
5507RJ*
Dual RJ11/RJ45
Connector Faceplate –
Mounts one or two RJ keystone
type connectors – has one opening
and a KO for the other.
5
NOTE: All face plates have a standard measurement of 4 1/4" x 1 7/8"
(108mm x 34mm).
* Add “V” suffix for Ivory finish or “WH” suffix for White finish.
5507 Series Faceplates