Cut Sheet

Catalog No./Item Description/Specifications
5006A Internal Wire Guard – Protects
wire and cables from gap behind
butted sections of 5000C Raceway
Cover. Installed when the 5006
Cover Clips are not used.
5010A* Entrance End Fitting – Connects
1/2" or 3/4" conduit to Access
5000 Series Raceway. Has one
concentric 1/2" or 3/4" KO
for each channel.
5010R* Right End Cap – Closes off open
right end of run of 5000B Access
5000 Series Raceway Base.
5010L* Left End Cap – Closes off open
left end of run of 5000B Access
5000 Series Raceway Base.
5017B Internal Base Elbow – Mounts
sections of 5000B Access 5000
Series Raceway Base at 90°
internal corners.
5017C* Internal Cover Elbow – Mounts
sections of 5000C Cover and 5000T
Raceway Quarter Round Trim at 90°
internal corners.
Overall Assembled
Depth is
1 15/16" (49mm)
4 19/32"
(117mm)
23/32"
(18.3mm)
3 9/16"
(90mm)
5 1/16"
(129mm)
5 29/32"
(150mm)
1 3/16"
(30mm)
5/16"
(7.9mm)
1 1/2"
(38mm)
•
5 29/32"
(150mm)
1 5/16"
(33mm)
5 5/16"
(129mm)
5 5/16"
(129mm)
2 21/32"
(67mm)
1 5/8"
(41mm)
1 3/16"
(30mm)
5/16"
(7.9mm)
•
•
3
Catalog No./Item Description/Specifications
5005* Low-Voltage Blank Plate –
Covers entire low-voltage
recess in device plate.
5007C Device Bracket – Mounts
standard devices. Snaps into
top section of base wherever
an outlet is needed.
5007C-1A* External Device Cover Plate –
Mounts one standard device and
up to two voice/data connectors
.
Accepts 5507 Series Faceplates
and Pass & Seymour
®
Activate
Keystone Jacks and Inserts.
5007C-2AB* Deep Device Plate – Mounts
deeper devices such as surge
protection, GFCI devices, and
Pass & Seymour
®
Activate
communications inserts. Accepts
5507 Series Faceplates, 2A size
Activate inserts, and Wiremold
CM2 Series Open System
Communication Modules.
5007C-2RT* Deep Device Plate – Mounts
deeper devices such as surge
protection, GFCI devices and
Ortronics
®
communications
inserts. Accepts 5507 Series
Faceplates, Ortronics
®
Tracjack
and Series II Inserts.
5001 Base Coupling – Aligns
base sections of Access 5000
Series Raceway.
5006* Cover Clip – Covers seam
between butted sections of
5000C Raceway Cover.
9/16"
(14.3mm)
9/16"
(14.3mm)
6 3/8"
(162mm)
15/16"
(23.8mm)
4 9/16"
(116mm)
5 13/32"
(137mm)
3/4"
(19.1mm)
2 13/16"
(71mm)
5 3/16"
(132mm)
5 3/16"
(132mm)
1 1/8"
(29mm)
3 11/16"
(99mm)
2"
(51mm)
Access 5000 Series Raceway Fittings
* Add suffix “WH” for white, “BK” for black, and “GY” for gray finish.
1 1/2"
(38mm)
4 7/32"
(107mm)
9/16"
(14.3mm)
15/16"
(23.8mm)
5 3/16"
(132mm)