Cut Sheet

3
Catalog No./Item Description/Specifications
5018C* External Cover Elbow –
For mounting cover and trim cover
at 90° external corners.
5018WG External Elbow Wire Guard –
Installs at a mitered external elbow
joint behind the covers to protect
from sharp objects being
inserted. Not needed when
5018C external cover elbow
is used.
2700WC Wire Clips – Holds and
2800WC secures wiring and cabling
2900WC inside raceway. Mounts with
adhesive backing.
Catalog No./Item Description/Specifications
5006A Internal Wire Guard –
Protects inside wire/cables
from gap behind butted
cover sections. Installed
when the 5006 Cover Clips
are not used.
5010A* Entrance End Fitting –
Used to connect 5000
to 1/2" [12.7mm] or 3/4"
[19.1mm] conduit. Has
one 1/2" [12.7mm] or 3/4"
[19mm] concentric KO
for each channel.
5010R* Right End Cap –
For closing open right end
of 5000 Base run.
5010L* Left End Cap – For closing
open left end of 5000 Base
run.
5017B Internal Base Elbow –
For mounting base at
90° internal corners.
5017C* Internal Cover Elbow – For
mounting cover and trim
cover at 90° internal corners.
5017WG Internal Elbow Wire Guard –
Protects wiring at mitered internal
cover; snaps into 5017B Base
Elbow. Not needed when 5017C
internal cover elbow is used.
5018B External Base Elbow –
For mounting base at 90°
external corners.
A full line of molded fittings are available.
Overall Assembled
Depth is
1 15/16" [49mm]
Access 5000 Raceway Fittings
4 19/32"
[117mm]
23/32"
[18.3mm]
11/16"
[17.5mm]
5 1/4"
[133mm]
2 1/2"
[64mm]
1 1/2"
[38mm]
1 1/2"
[38mm]
4 3/16"
[106mm]
3 9/16"
[90mm]
5 1/16"
[129mm]
5 29/32"
[150mm]
1 3/16"
[30mm]
5/16"
[7.9mm]
1 1/2"
[38mm]
•
5 29/32"
[150mm]
1 5/16"
[33mm]
5 5/16"
[129mm]
5 5/16"
[129mm]
2 21/32"
[67mm]
1 5/8"
[41mm]
4 3/4"
[121mm]
7/8"
[22.2mm]
1"
[35mm]
1"
[35mm]
3/4"
[19.1mm]
5 1/16"
[129mm]
1 3/16"
[30mm]
5/16"
[7.9mm]
•
•
1 1/2"
[38mm]
1 1/2"
[38mm]
1 1/2"
[38mm]
NOTE:*Add suffix “WH” for White Finish, “BK” for Black, and “GY” for Gray.
•
•