Cut Sheet

ManualsBrandsWiremold ManualsConduit5000 Raceway Left End Cap

n Dual channel raceway. Power and low-voltage can

be run in same raceway.

n Modular device brackets and faceplates. New and

emerging power or communications technologies can

be integrated into existing installations reducing overall

life cycle costs.

n Patented safety interlock system on covers. Offers

additional safety for home or high traffic applications.

n Full line of fittings and accessories. Fittings snap

onto base and overlap to cover seams for quick and

easy installation.

n Eight-foot lengths. Easy installation by one person with

fewer joints to cover. Custom lengths are also available.

Consult factory for more information.

n Low-profile design. Raceway can be installed as architec-

tural molding to eliminate the need for additional finish work.

n Aesthetic finish options. Variety of PVC and wood veneer

finishes enhance any decor.

n Durable PVC material. Lightweight and easy to cut and

install. Meets UL flammability requirements and is UL Listed

and CSA Approved for up to 600 volts.

n Datacom connectivity options. Accepts industry

standard and proprietary devices from a wide range of

manufacturers to provide a seamless and aesthetically

pleasing interface for voice, data, audio, and video

applications at the point of use.

UL and cUL Listed component raceways. File E90378

Guide RJTX, Fittings: File E90377 Guide RJYT. Meets

Article 386 of NEC and meets Section 12-600 of CEC.

Access

5000 Raceway conceals

and organizes electrical wiring and

low-voltage cabling in low-profile,

decorative molding. The dual channels

and low-profile device plates of this

attractive raceway provide multiple

options for power and communications

cabling.

Access 5000 Raceway also saves time

and money because it installs faster and

cleaner than conventional in-wall wiring.

It’s also more energy efficient because

walls, vapor barriers and insulation remain

intact. And it’s a snap to reconfigure when

adding wiring or cabling to homes, offices,

classrooms or hotels.

WIREMOLD

Access

5000 Series Raceway

Aesthetically Pleasing, Nonmetallic, Low-Profile,

Multiple Channel Raceway System

FEATURES & BENEFITS

Access 5000 Series Raceway installed as baseboard.

ED285R9 – Updated January 2016 – For latest specs visit www.legrand.us/wiremold

Access 5000 Series

Raceway can be

installed as base-

board, chair rail or

crown molding.

Summary of content (8 pages)

PAGE 1
WIREMOLD® Access® 5000 Series Raceway Aesthetically Pleasing, Nonmetallic, Low-Profile, Multiple Channel Raceway System Access® 5000 Raceway conceals and organizes electrical wiring and low-voltage cabling in low-profile, decorative molding. The dual channels and low-profile device plates of this attractive raceway provide multiple options for power and communications cabling. Access 5000 Raceway also saves time and money because it installs faster and cleaner than conventional in-wall wiring.
PAGE 2
Access 5000 Series Raceway System Layout NOTE: Illustration is for showing product applications only. D E A F B G C Back Feed Position A – 5010A B – 5007C-2A C – 2A D – 5017B, 5017C Entrance End Feed Deep Device Bracket Activate Connectivity Insert Internal Base Elbow, Internal Cover Elbow E – 5007C-1A F – 5010R G – 5010L H – 5018B, 5018C Download this product’s PEP ecopasport® environmental product declaration at www.legrand.us/resources-and-downloads.
PAGE 3
Access 5000 Series Raceway Fittings Catalog No./Item 5005* Description/Specifications Catalog No./Item Low-Voltage Blank Plate – Covers entire low-voltage recess in device plate. 1 1/2" (38mm) 5006A 23/32" (18.3mm) 4 7/32" (107mm) 5007C 1 1/8" (29mm) Device Bracket – Mounts standard devices. Snaps into top section of base wherever an outlet is needed. 3 11/16" (99mm) 5007C-1A* 9/16" (14.3mm) 6 3/8" (162mm) 5 3/16" (132mm) 5007C-2AB* 9/16" (14.
PAGE 4
Access 5000 Series Raceway Fittings (continued) Catalog No./Item Description/Specifications 5017WG 4 3/4" (121mm) Internal Elbow Wire Guard – Protects wiring at mitered internal cover; snaps into 5017B Internal Base Elbow. Not needed when 5017C Internal Cover Elbow is used. 5018B 1" (35mm) External Base Elbow – For mounting 5000B Raceway Base at 90° external corners. •• 7/8" (22.2mm) Catalog No./Item 5018WG 5018C* 11/16" (17.
PAGE 5
5507 Series Face Plates Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications 55007AD Modular Furniture Adapter – Mounts Activate modular furniture bezel, and other modular furniture adapters. 5507RJ Dual RJ11/RJ45 Connector Faceplate – Mounts one or two RJ Keystone type connectors. Has one opening and a KO for the other. 5507B Blank Faceplate – Covers unused compartments in the device bracket.
PAGE 6
Access 5000 Series Raceway Wire Fill Capacity Charts ACCESS 5000 RACEWAY WIRE CAPACITIES FOR POWER/TOP COMPARTMENT WIRE SIZE .96" (24mm) THHN, THWN 10 AWG 12 AWG 14 AWG 12 20 24 .74" (19mm) ACCESS 5000 RACEWAY CABLE FILL CAPACITIES FOR DATA/COMMUNICATION CABLE/WIRE SIZE Inches UNSHIELDED TWISTED PAIR 4-pair, 24 AWG Cat 5 UTP 4-pair, 24 AWG Cat 3 UTP Bottom Compartment 20% Fill 40% Fill Top Compartment 20% Fill 40%Fill 0.220 0.190 5.5 4.8 7 9 14 19 10 13 20 27 0.140 0.
PAGE 7
NOTES 7
PAGE 8
NOTES Electrical Wiring Systems 60 Woodlawn Street West Hartford, CT 06110 Phone: 1.877.BY.LEGRAND (295-3472) www.legrand.us ED285R9 – Updated January 2016 – For latest specs visit www.legrand.us/wiremold © Copyright 2016 Legrand All Rights Reserved 570 Applewood Crescent Vaughan, Ontario L4K 4B4 Phone:905.738.9195 www.legrand.