Cut Sheet

ManualsBrandsWiremold ManualsConduitRaceway Cover, 5400 Series, Non-Metallic, Ivory, 5" x 8'

5400

Nonmetallic Raceway

Features & Beneﬁts

ED467R14 – Updated April 2005 – For latest specs visit www.wiremold.com

he 5400 Series Raceway from The Wiremold

Company provides wire and cable management

for data, voice, video, and power applications. For

school and ofﬁce applications, this is an ideal solution for

providing ﬂexibility and accessibility of wire and cable.

■ 2" [51mm] FiberReady

ﬁttings. The FiberReady Series

of ﬁttings snap on to overlap raceway base and cover for

an aesthetic installation. Fittings are UL veriﬁed for a 2"

[51mm] bend radius and exceed the recommendations of

TIA/EIA 569-A. They provide cable protection in lay-in

and pull through cable installations.

■ Twin Snap cover. Complete segregation of access to

power and low voltage services for installation ﬂexibility.

■ Large cable capacity in a low proﬁle design.

Accommodates needs now and in the future.

■ Device mounting in-line, offset or both. Offers ﬂexibility

and up to three separate services at the same location.

■ Made of PVC material. Lightweight and easy to cut. Meets

UL ﬂammability requirements. UL Listed for up to 600V.

■ Ivory and white ﬁnish. Blends with any decor. Consult

factory for custom colors. Paintable using latex paint.

■ 5450-ORAP Bracket accommodates wireless. Designed

for use with Ortronics

Wi-Jack

™

Wireless Access Points.

■ Corner drop feed. Provides aesthetically pleasing means for

feeding horizontal runs of raceway.

■ 5400 Available prewired. Manufactured to speciﬁed job site

lengths, raceway comes completely prewired, ready to install.

Jobs can be packaged by area, ﬂoor, or building and shipped

per job site requirements.

■ Electrical device identiﬁcation for prewired jobs.

Eliminates guesswork and circuit tracing to speed additions

and renovations.

■ Datacom connectivity options. Accepts industry standard

and proprietary devices from a wide range of manufacturers

to provide a seamless and aesthetically pleasing interface for

voice, data, audio, and video applications at the point of use.

■

Listed.

Nonmetallic Raceway with

Twin Snap

™

Cover System

Available Factory Prewired

5400TB

Summary of content (8 pages)

PAGE 1
5400 Nonmetallic Raceway Nonmetallic Raceway with Twin Snap™ Cover System Available Factory Prewired he 5400 Series Raceway from The Wiremold Company provides wire and cable management for data, voice, video, and power applications. For school and office applications, this is an ideal solution for providing flexibility and accessibility of wire and cable. T 5400TB Features & Benefits ■ 2" [51mm] FiberReady ® fittings.
PAGE 2
5400 System Layout 5450T 5400TB 5417FO 5410DFO 5406T 5450A3 5400TWC 5400TC 5418 5474 5410 5415 5418FO 5400C 2A Communication Devices 5406A 5411FO 5450 NOTE: Illustration is for showing product applications only. 5400 Raceway Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications 5400TB* Two-Compartment Base – Two equal compartments. Base accepts single or Twin Snap Cover. MXN2F21* Entrance End Fitting – For feeding corner drop raceway from larger conduits.
PAGE 3
5400 Raceway Fittings Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications 5406A* Cover Clip – Covers seam between sections of 5400C. 5450-ORAP Ortronics Wireless Bracket – Used to mount Ortronics® Wi-Jack™ Wireless Solution to 5400 Series Raceway. CM-EPLA* End Plates – Includes two outlet identification labels with clear covers and two matching screw covers.
PAGE 4
5400 Raceway Fittings (Continued) Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications 5410DFO* Divided Entrance End Cap – FiberReady ® divided fitting to feed 5400TB Series Raceway. Includes 1", 1 1/4", 1 1/2", and 2" trade size KOs on back and top. 5417FO* FiberReady 2" [51mm] Radius Full Capacity Internal Elbow – A full capacity 90° internal corner with integral dividers that provides 2" [51mm] cable bend radius for UTP and Fiber Optic installations.
PAGE 5
507 Series Faceplates Catalog No./Item Description/Specifications 5507AD* Modular Furniture Adapter – • For mounting Activate modular furniture bezel and other modular furniture adapters. 5507B* 5507D* ORT Catalog No./Item Description/Specifications 5507T2* Single Receptacle Faceplate – For covering single receptacles – 1.41" [36mm] diameter. 5507RJ* Dual RJ11/RJ45 Connector Faceplate – •For mounting one or two RJ type connectors – has one opening and a KO for the other.
PAGE 6
5400 Twin Snap Nonmetallic Prewired Raceway Features Features Standard Options Communication Devices Ortronics or Pass & Seymour Activate™ Connectivity System Devices Other manufacturers Electrical Devices Pass & Seymour Other manufacturers and some International devices Base Length Longest = 8' [2.
PAGE 7
Wire Fill Capacity Charts 5400 Raceway Wire Fill for Power WIRE SIZE CABLE/WIRE SIZE O.D. (Approx. Dia.) Inches [mm] NO. OF CONDUCTORS COMP. A* POWER WIRING WITHOUT DEVICES 14 AWG 12 AWG 10 AWG 8 AWG 6AWG 0.111 0.130 0.164 0.216 0.254 [2.8] [3.3] [4.2] [5.5] [6.5] 50 34 60 21 19 POWER WIRING WITH DEVICES 14 AWG 12 AWG 10 AWG 8 AWG 6 AWG 0.111 0.130 0.164 0.216 0.254 [2.8] [3.3] [4.2] [5.5] [6.
PAGE 8
Datacom Connectivity Options Now you have a wide range of options for providing datacom connectivity into Wiremold® Cable Management Systems.